STEP 12 CHECK TIRE PRESSURE (A) The ideal tire pressure setting is determined by three factors: rider weight, type of terrain and the desired balance of comfort and traction. The pressures here are a suggested starting point and can typically range +/- 5psi. Front: 35psi, Rear: 35psi. It is always a good idea to inspect your tires for tears and punctures before and after every ride. STEP 13 INSTALL BOTTLE CAGE STEP 14 INSTALL HANDGUARDS Your bike comes supplied with a water bottle cage. Undo the two 3mm bolts (B) on the downtube of your bike and fit the cage (C). Tighten to 3Nm. Please refer to instructions from Acerbis on handguard assembly included in the handguard box. Assemble the handguard per instructions then remove the handguard clamp screw (D) and place clamp over bars. Push handguard clamp up against the shifter on the right side or the dropper lever on the left side of the bike. Once in place, tighten the handguard clamp bolt with a phillips head screwdriver (E). Repeat the process on the other side. 27
RkJQdWJsaXNoZXIy OTcxOTk3