STEP 7 INSTALL FRONT WHEEL Remove all packaging from the front wheel making sure the hub end caps are still in the correct place and that they haven’t been pulled off by accident (A). If they do come off, just press them back into position. Then remove the brake pad spacer (B). At this stage be careful not to pull the front brake lever until the wheel has been installed. Do not touch the brake rotors with your hands or gloves as this may contaminate them. With a 6mm Allen key loosen in a counterclockwise direction and remove the front axle from the drive-side of the bike (C). Position the wheel so that the rotor fits into the brake caliper body and that the hub body slots into the grooves on the fork (D). Once everything is aligned reinstall front axle. With a 6mm Allen key, and applying some inward pressure, tighten the axle in a clockwise direction (E). Torque to 7Nm. After front wheel is installed, ensure even spacing of front fender between the fender struts and the tire. If uneven, move the brackets to even out the spacing and re-snug the fender screws with a phillips bit. 21
RkJQdWJsaXNoZXIy OTcxOTk3