STEP 6 INSTALL FRONT FENDER Start by removing the front fender from the rear wheel packaging by cutting the two zip ties (A). Set front wheel aside and remove remaining packaging on fender. Locate the front fender strut clamps and fork rubber shims located in the black mesh bag that came with your bike (B). Remove the fender fork bolt with a phillips head screwdriver or bit (C). Next, mount the fender to the fork with a phillips bit and handtighten (D). Next unscrew the bolt on the fender clamp with a phillips head screwdriver or bit and place around the bottom of the fork leg. Take the fender shim pad and place on fork under the clamp to ensure no damage once fender is tightened. Now take the fender strut and place the ending circle on the screw of the clamp and tighten with the phillips bit (E). Repeat this process on the other side and snug both screws. Now that the fender is on, go back to the top of the fender and push up and tighten the fender in place (F) until snug. 19
RkJQdWJsaXNoZXIy OTcxOTk3