STEP 2 CHARGE BATTERY Once bike is in bike stand, remove remaining packaging. The battery is supplied in sleep mode. To wake it up you need to connect it to your battery charger. You can do this with the battery in your bike, but for simplicity while setting up your bike, we suggest removing the battery and placing it directly on charge. It will take between 3-5 hours to fully charge the 504 Wh battery. See page 48 for further battery charging information. The battery will be locked in position. To remove it you will need to use the key provided in the accessory box following the steps below. The lock for the battery is positioned on the upper part of the downtube on the lefthand side of the bike. With one hand supporting the battery, insert the battery key into the lock (A) and turn the key a quarter turn in a clockwise direction. This will release the battery from the lock position and onto the catch-tab. Now with the battery on the catch-tab, press the release button (B) until the battery clears the downtube and pull battery forward and out. Your battery will now be free from your bike. Remove the key and keep it in a safe place. You can now charge the battery, see page 48 for further information. It’s easiest to charge the battery while it’s in the bike. There is a port on the bike above the motor near the lower link (C). 13
RkJQdWJsaXNoZXIy OTcxOTk3