TRASK Turbo, anyone? Yes, turbo! Trask offers a turbo kit for your M-Eight engine. The kit offers extreme power gains in a clean, stylish package that will get you looks and generate plenty of big smiles when you give the throttle a turbocharged twist. The kit includes everything needed to turn your engine into a turbocharged powerhouse. PART # DESCRIPTION SUG. RETAIL FOR 17-22 FLHT/FLHX/FLHR/FLTR AND 18-22 SOFTAIL MODELS 0904-0096 Black w/ black exhaust $5,999.95 0904-0097 Black w/ brushed stainless exhaust 5,999.95 0904-0098 Polished w/ brushed stainless exhaust 5,999.95 TORNADO TURBO KIT* • Bolt on 40-50% more power to your stock 107", 114" or 117" M8 motors • Trask compressor and turbine housings with Garrett internals • Stainless steel pipe kit is mandrel bent and TIG welded; includes wastegate • Brushed stainless or black exhaust with race-inspired stainless steel heat shields • Trask plenum with integrated blow-off valve • Includes all install components: larger injectors, spark plugs, boost gauge with mount, oil feed, drain lines, custom cam cover, Thundermax tune files and all necessary hardware and gaskets • Made in the U.S.A. NOTE: Requires use of Thundermax ECM PART #s 1020-2664 or 1020-2795 (sold separately). NOTE: Does not fit on Twin Cooled models. NOTE: Intended for offroad use only and recommended for experienced riders. *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES THE DRAG SPECIALTIES APRIL 2023 dragspecialties.com
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 2 BIG RADIUS EXHAUST SYSTEMS* • PCX™ (Power Chamber Exhaust) Technology • Chambered high-flow catalyst cartridge designed to increase torque • Full coverage heat shields • Include mounting hardware and installation instructions • 49-state emissions compliant • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 07-16 FLHT/FLHR/FLHX/FLTR 1800-2585 Chrome $1,099.99 FOR 13-17 FXSB/FXSE 1800-2588 Chrome 1,099.99 1800-2589 Black 1,149.99 PART # DESCRIPTION SUG. RETAIL FOR 06-17 DYNA MODELS (EXCEPT FLD) 1800-2586 Chrome $1,099.99 1800-2587 Black 1,149.99 FOR 14-22 XL (EXCEPT FOR 21-22 SPORTSTER S/RH1250S AND 22 NIGHTSTER/RH975) 1800-2590 Chrome 1,099.99 1800-2591 Black 1,149.99 PART # DESCRIPTION SUG. RETAIL FOR 00-17 FXS/FXST/FLST MODELS (EXCEPT 08-11 FXCW/C, 09 FXSTSSE, 13-17 FXSB/FXSE) 1800-2606 Chrome $1,149.99 FOR 06-17 DYNA (EXCEPT 12-17 FLD) 1800-2604 Chrome 1,099.99 1800-2605 Matte black 1,099.99 BIG SHOTS STAGGERED 2-INTO-2 EXHAUST SYSTEMS* • PCX™ (Power Chamber Exhaust) technology • Chambered high-flow catalyst cartridge designed to increase torque • Full coverage heat shields • Power chamber hidden crossover • CNC-machined billet end caps • Include instructions and mounting hardware • 49-state emissions compliant • Made in the U.S.A. 1800-2605 1800-2604 1800-2585 1800-2587 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
APRIL 2023 THE DRAG SPECIALTIES 3 dragspecialties.com UPSWEEP 2-INTO-1 EXHAUST SYSTEMS* • PCX™ (Power Chamber Exhaust) Technology • Chambered high-flow catalyst cartridge designed to increase torque • Lightweight, high-grade 304 stainless steel construction • Hand TIG welded PART # DESCRIPTION SUG. RETAIL FOR 18-22 FLDE/FXBB/FXFB/FXLR/FLSL/FXST MODELS 1800-2609 Black $1,449.99 1800-2608 Brushed 1,299.99 FOR 91-17 DYNA GLIDE (EXCEPT FLD) 1800-2610 Brushed 1,299.99 PART # DESCRIPTION SUG. RETAIL FOR ALL 14-22 XL MODELS (EXCEPT XL1200T, 21-22 SPORTSTER S/RH1250S AND 22 NIGHTSTER/RH975) 1800-2611 Brushed $1,299.99 3" ELIMINATOR 300 SLIP-ON MUFFLERS* • PCX™ (Power Chamber Exhaust) technology • Chambered high-flow catalyst cartridge designed to increase torque • CNC-machined billet end caps • Available in a black finish • 49-State emissions compliant • Mounting hardware and instructions included • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1801-1515 For 18-22 FLFB/FXBB/FXLR/FXBR/FLSL/FXST models $849.99 PART # DESCRIPTION SUG. RETAIL FOR 18-22 FLFB/FXBB/FXLR/FXBR/FLSL/FXST 1801-1521 Chrome $749.99 FOR 07-17 FXST/FLST, 10-12 FLSTSE, 08-11 FXCW/C, 13-17 FXSB/FXSE (EXCEPT FLS/ FXSTD/ FLSTSB/ FLSTF/ FLSTN) 1801-1525 Chrome 749.99 PART # DESCRIPTION SUG. RETAIL FOR 91-17 DYNA (EXCEPT 10-17 FXDWG AND 08-17 FXDF, 12-16 FLD, 14-17 FXDL/FXDLS) 1801-1526 Chrome $749.99 1801-1531 Black 799.99 FOR 14-22 XL MODELS (EXCEPT 21-22 SPORTSTER S/RH1250S AND 22 NIGHTSTER/RH975) 1801-1527 Chrome 749.99 3" ROUND TWIN SLASH SLIP-ON MUFFLERS* • PCX™ (Power Chamber Exhaust) Technology • Chambered high-flow catalyst cartridge designed to increase torque • Full coverage heat shields • 49-State emissions compliant 1800-2611 1800-2609 1801-1531 1801-1525 • Mounting and hardware instructions included • Sold in pairs • Made in the U.S.A. • 49-State emissions compliant • Mounting and hardware instructions included • Made in the U.S.A. *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 4 KHROME WERKS Exhaust products that perform for the eyes, ears and soul. Khrome Werks exhaust are designed for superior power and performance and a signature sound. The highly polished 16-gauge muffler bodies are designed and built with industry-leading precision to ensure the best fit, simple installation and a lasting finish that will last. 4.50" HP-PLUS® SLIP-ON MUFFLERS* • Engineered for performance, style and sound • Produce the Khrome Werks signature authoritative tone without annoying high-frequency noises • 4.50" 16-gauge muffler body • Comes in chrome with blunt-end chrome tips • Laser-etched logo and accents • Absorptive baffle covered with stainless steel mat and high-temp fiberglass 1801-1771 INSTIGATOR AIR CLEANER SERIES* • Inspired by two of Khrome Werk’s most popular designs: Tracer and Klassic • Available in black • Reusable black cotton element is protected by stainless steel mesh • One-piece aluminum backplate with hidden breathers • The M-Eight applications contain an oil catch can PART # DESCRIPTION SUG. RETAIL FOR 17-22 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK/HD TRIKE AND 18-22 SOFTAILS 1010-3162 Klassic $399.95 1010-3163 Tracer 399.95 PART # DESCRIPTION SUG. RETAIL FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE, 11-12 FLSTSE AND 16-17 FXDLS 1010-3164 Klassic $399.95 1010-3165 Tracer 399.95 1010-3165 1010-3162 DROPDOWN MIRROR BRACKETS • Drops your stock mirrors down 3.5”; avoid bashing hands into your mirrors when using 10” and 12” bars • Allows you to keep a sleek and concealed look without needing to use bar mirrors • Stock mirror bolts onto bracket which bolts onto fairing; all hardware included • Black finish; sold as a pair PART # FITS MODELS SUG. RETAIL 0640-1678 For 14-22 FLHX models $145.95 • Improved torque and horsepower from the hit of the throttle • Billet aluminum tips can be rotated 360°at 90°increments; feature a high-temp powdercoated finish • Mufflers sold in pairs • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1801-1771 For 17-22 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK models $789.95 1801-1772 For 95-16 FLT/FLHT/FLHR/FLHX/FLTR models 789.95 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
APRIL 2023 THE DRAG SPECIALTIES 5 dragspecialties.com TURNOUT 2-INTO-1 EXHAUST SYSTEMS* • The headpipe merges into a large 2.25" collector that steps up to a 2.5" core • Core is perforated and wrapped in a stainless steel screen, then enclosed in a fiberglass pillow • 4" muffler body capped with a 4" machined aluminum dual-cut tip • Body can be rotated upward from its stock position • Works with stock or extended saddlebags • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 17-22 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK MODELS 1800-2554 Chrome $1,010.95 1800-2555 Black 1,122.95 PART # DESCRIPTION SUG. RETAIL FOR 09-16 FLHT/FLHTK/FLHR/FLHX/FLTRX/FLTRU MODELS 1800-2552 Chrome $1,010.95 1800-2553 Black 1,122.95 PART # DESCRIPTION SUG. RETAIL FOR 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL TRIKE, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE AND 11-12 FLSTSE 1010-3025 Chrome $526.95 1010-3026 Black 526.95 1010-3029 Black/chrome 526.95 FOR 99-17 TWIN CAM W/ CV CARB/DELPHI EFI (EXCEPT 08-17 DRESSER/H-D FL TRIKE, 16-17 FXDLS, 16-17 SOFTAILS, 14-15 FLSTNSE, 13-14 FXSBSE AND 11-12 FLSTSE) 1010-3027 Chrome 526.95 1010-3028 Black 526.95 1010-3030 Black/chrome 526.95 FOR 04-22 XL W/ CV CARB/DELPHI EFI (EXCEPT 21-22 SPORTSTER S/RH1250/S, 22 NIGHTSTER/RH975) 1010-3031 Chrome 526.95 1010-3032 Black 526.95 1010-3033 Black/chrome 526.95 RPT AIR INTAKES* • Same internal components as the Cobra Powerflo air intake, with the outside cover replaced with a machined aluminum industriallooking frame that echoes Cobra’s popular Race Pro mufflers • Unique internal venturi design promotes maximum airflow • Includes all the fasteners, seals, backing plate and mounting hardware to make for an easy installation • Formed stainless steel mesh insert keeps out bugs and debris • Made in the U.S.A. 1010-3033 1010-3028 1010-3025 1800-2555 1800-2552 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 6 BARE BONES PILLION SEATS • Simplistic styling brings out the true expression of your custom or stock bike • Top-grade vinyl cover • Baseplate is powdercoated steel and carpeted to protect painted surfaces • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 18-22 FXBB/FXBBS/FLSL/FXST 0802-1477 Smooth pillion pad $180.00 0802-1478 Diamond stitch pillion pad 238.00 0802-1479 White diamond stitch pillion pad 238.00 FOR 18-22 FLDE/FLHC/FLHCS 0802-1474 Smooth pillion pad 180.00 0802-1475 Diamond stitch pillion pad 209.00 PART # DESCRIPTION SUG. RETAIL FOR 18-22 FLDE/FLHC/FLHCS (CONT) 0802-1476 White diamond stitch pillion pad $272.00 FOR 18-22 FXLR/FXLRS/FXLRST/FLSB 0802-1480 Smooth pillion pad 180.00 0802-1481 Diamond stitch pillion pad 238.00 0802-1482 White diamond stitch pillion pad 238.00 DOCKING COVERS • Hide the rear docking hardware when you’re not using it • Made from 316F stainless steel with neodymium magnets for a solid hold • Sold in pairs PART # DESCRIPTION SUG. RETAIL SHORT (25.2MM X 30MM) 3550-0329 Mirror polished w/ American flag skull $89.95 3550-0330 Black w/ American flag skull 89.95 3550-0331 Mirror polished w/ contrast cut American flag skull 89.95 3550-0332 Black w/ contrast cut American flag skull 89.95 PART # DESCRIPTION SUG. RETAIL SHORT (25.2MM X 30MM) (CONT) 3550-0333 Mirror polished w/ Don't Tread On Me $89.95 3550-0334 Black w/ Don’t Tread On Me 89.95 3550-0335 Mirror polished w/ cross 89.95 3550-0336 Black w/ cross 89.95 FOR ALL H-D MODELS WITH DOCKING HARDWARE 3550-0329 3550-0330 3550-0331 3550-0332 3550-0333 3550-0334 3550-0335 3550-0336 0802-1478 0802-1482 0802-1474
APRIL 2023 THE DRAG SPECIALTIES 7 dragspecialties.com RICKRAK® SADDLEBAG KOOLER • New removable insulated inner liner • Double zipper top access • Durable water-resistant polyester shell • Grab handles and padded shoulder strap • Three outer shell zippered pockets • Designed to fit most large hard saddlebags • Dimensions: 19" W x 11" H x 6" D; holds up to 24 cans • Sold each • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 3511-0029 For all 99-22 H-D models $59.95 SUREKLIK® SADDLEBAG SAFETY BOLT KIT • Secure your bags and never worry about them falling off; allows for a sturdier attachment to your mounting system • Mounts flush • Sold as set of four • Made in U.S.A. NOTE: To install on 85-16 bikes, remove stock spring clips on fender frame, and replace with included U-Nuts. Make sure U-nuts are installed with the threads on side facing the wheel. NOTE: To install on 17-22 bikes, replace stock HD knobs with safety bolts without using the U-Nuts NOTE: Do not thumb tighten screws. Tighten down until you hear “KLIK-KLIK-KLIK”. PART # DESCRIPTION SUG. RETAIL 3501-1938 For 85-22 H-D touring models with hard saddlebags $74.95 EXTENDED SEAT BOLT • Made from top quality stainless steel with a black finish • Extended bolts designed for H-D models with tour packs • Makes life easier; eliminates need for screwdriver when taking seat off of bike • Knurled handle for easy grip; ¼"-20 threads • Made in U.S.A. PART # DESCRIPTION SUG. RETAIL 2401-1576 Black $19.95 GAS KAP KEEPER • No more dropped or lost caps, tank dings or gas on your seat • Inner magnet encapsulated by rubber on all sides • Holds cap to any steel surface • Attaches to gas cap with 3M® Automotive two-sided tape; gas cap not included • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0703-0897 Gas Kap Keeper $14.95
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 8 LEGEND SUSPENSION Give your Tri-Glide a full suspension upgrade with Legend Suspension. Choose from a full Air-A suspension setup or Revo Heavy-Duty shocks for superior ride quality compared to the stock suspension. Both feature full adjustability so you can customize your suspension to fit your riding style. LEGEND AIR-A AND AIR SUSPENSION KITS FOR TRI-GLIDE MODELS 1311-0176 • Complete wire harness installs with three easy Deutsch connectors • System includes OEM-looking black handlebarmounted control for easy on-the-go adjustability • Six external knob adjustments allow for fine-tuning of rebound damping (this applies to the Air-A only) • Provide optimum rebound performance for any given rider weight, personal ridequality preference or personal riding style • Light to heavy riders can fine-tune ride preference • Riders with aggressive to casual styles can tune to desired quality or personal preference • Made in the U.S.A. 1310-2314 PART # DESCRIPTION SUG. RETAIL FOR 17-22 FLHTCUTGSE/FLHTCUTG/FLRT 1311-0176 13.6" Air $1,799.95 PART # DESCRIPTION SUG. RETAIL FOR 17-22 FLHTCUTGSE/FLHTCUTG/FLRT (CONT) 1311-0177 13.6" Air-A $1,999.95 1310-2312 LEGEND REVO-A SHOCKS FOR M-EIGHT SOFTAILS • All new Revo-A coil design for the M-Eight Softail • Available in 12.5" or 13.5", standard or heavy-duty applications • Revo-A coil spring provides superior ride comfort, improved performance, and increased resistance to bottoming for all day comfort • Provides optimum rebound performance that can be fine-tuned for any given rider weight, personal ride preference or personal riding style • Adjustable preload for rider set up, also allows for minimal pre-load adjustment when changing between rider's weights and loads • Seven external knob adjustments allow fine-tuning of rebound utilizing needle valve technology to adapt to your riding style • Low friction sleeve bearings both top and bottom for ease of installation, this also allows the shock to float in its mount and avoid shock bind • Hard anodized, machined billet aluminum 46mm mono tube utilizes a lightweight high flow piston design for improved fluid flow resulting in unmatched handling and bike control • Hard chromed shaft is 14% larger for increased strength PART # DESCRIPTION SUG. RETAIL 1310-2313 12.5" standard $999.95 1310-2314 12.5" heavy-duty 999.95 PART # DESCRIPTION SUG. RETAIL 1310-2315 13.5" standard $999.95 1310-2316 13.5" heavy-duty 999.95 • High quality chrome-silicon spring for consistent spring rate for the life of the motorcycle • Internal floating nitrogen piston ensures consistent damping performance • Deflective disc valving self-adjusts to frequency and ensures controlled performance • Legend's durable and low friction sealing system and sliding bearings provide improved performance and feel • Available in Black Type III hard coat anodize • Easy installation and adjustment replacing the stock shock and mounts with original OEM hardware • Sold as Mono Shock (1 shock only) • Preload wrench included • Designed for optimum performance with the Legend Axeo front suspension • Made in the U.S.A. • 13.6" length maximizes rear ride height on 17 and newer trikes utilizing OEM shock mount plate • Reduces dragging/scrubbing mufflers transitioning driveways, curbs or trailering • Air-A kit features an added rebound adjustability feature, while the Air kit does not • Exclusive Aramid Fiber air spring technology provides spring rate adjustability • Air springs maximize wheel travel and adjust to any desired ride height • Spherical mount bearings top and bottom • Hard anodized machined aluminum bodies • Legends low-friction seals eliminate stiction • High flow piston reacts quickly for improved fluid flow management • Deflective disc valved damping self-adjusts to frequency and ensures controlled performance • Air compressor included, pre-wired and model-specific mounting LEGEND REVO-A AND REVO SHOCKS FOR TRI-GLIDE MODELS PART# DESCRIPTION SUG. RETAIL FOR 17-22 FLHTCUTGSE/FLHTCUTG/FLRT 1310-2312 REVO-A shocks $999.95 PART# DESCRIPTION SUG. RETAIL FOR 17-22 FLHTCUTGSE/FLHTCUTG/FLRT (CONT) 1310-2311 REVO shocks $999.95 FOR 18-22 FXLRST/FXST/FXLRS/FLHCS/FLFBS/FXFBS/FLSL/FLSB/FLHC/FXBB/FXBRS/FLDE/FXLR/FXBR/FLFB/FXFB • 13.6” length eliminates the need for a lift kit and maximizes rear ride height on 17 and newer trikes utilizing OEM shock mount plates • Eliminates Tri-Glide low rear ride height • Reduces dragging/scrubbing mufflers transitioning driveways, curbs or trailering • Lighter feel in steering by shorter trail in front end • Legend's touring specific coil spring rates provide superior ride comfort, improved performance, and increased resistance to bottoming for all day comfort • Adjusts by hand, no tools needed • Trike specific spring rate • Black Type III hard coat anodize only • Spherical bearings allow easy installation and alignment • High-flow piston improves fluid flow management and allows quick response • Deflective disc valving self adjusts to frequency and ensures controlled performance • Low friction sealing system and sliding bearings for improved performance and feel • Made in the U.S.A. NOTE: 13.6" shocks only use OEM lower shock mount brackets. NOT compatible with aftermarket lift kits.
APRIL 2023 THE DRAG SPECIALTIES 9 dragspecialties.com RADIATOR GUARD • Designed to protect your vulnerable radiator from rocks thrown up from the front tire, or other debris that you may encounter • Made from 12-gauge 6061 laser-cut aluminum • Comes with mounting brackets and hardware for easy installation • Stealth gray finish • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1901-0920 For 21-23 RA1250/1250S models $166.49 TARGET TUNE* • Allows the factory ECM to interpret and use wideband O2 sensor signals • Target fuel table from the calibration is achieved in real time • Retains OEM closed loop and achieves adaptive fuel control strategy • Learns and uses VE table corrections as you ride • Does not interfere with dealer diagnostic/service tools • Includes OEM style connectors to plug into factory O2 harness, either 2- or 4-pin versions • Includes wide band O2 sensor • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1020-4037 For 21-22 M-Eight models w/ software level 28 $629.99 AUTOTUNE KIT FOR POWER VISION* • Plugs directly into the Power Vision with a single cable • Includes 18mm O2 sensors and power connector that plugs into the bike's harness • Provides real-time AFR feedback to the Power Vision • Allows for semi-automated fuel corrections • User can specify what air/fuel ratio to make each rpm and throttle position percentage combination • Makes it possible to adjust cruise for best fuel economy as well as larger throttle openings for peak power • Base settings included for air/fuel ratios, but are fully adjustable if need be • Made in the U.S.A. NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require modifications or relocation of their sensor bungs. PART # DESCRIPTION SUG. RETAIL 1020-4036 For use w/ Power Vision PART #1020-3170 $629.99 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 10 APE HANGER BAR KITS DESCRIPTION 14" 16" For 18-20 FLDE, FXBR/S, FXLR, 18-21 FLFB/S, FLHC/S, FLSB, FLSL, FXBB/S, 20-21 FXST (w/ ABS) 0601-5682 0601-5683 For 18-21 FXFB/S, 20-21 FXLRS (w/ ABS) 0601-5684 - BAGGER BAR KITS DESCRIPTION 10" 12" 14" For 17-20 FLTRX/S, 17-19 FLTRU, 20 FLTRK, 18-20 FLTRXSE CVO (w/ ABS) - 0601-5678 0601-5679 For 17-20 FLTRX/S, 17-19 FLTRU, 20 FLTRK (w/ ABS) (uses existing lower brake line) - 0601-5680 0601-5681 For 19-20 FLHT, 17-19 FLHTCU/L, 17-20 FLHTK/L, FLHX/S (w/ ABS) (uses existing lower brake line) - 0601-5677 - For 17-20 FLHTCU/L, FLHTK/L, FLHX/S, 19-20 FLHT, FLHTKSE (CVO), FLHXSE (CVO) (w/ ABS) - 0601-5676 - For 08-13 FLHT/C/CU, FLHX, FLHTK (w/ ABS) 0601-56731 - - For 08-13 FLHT/C/CU, FLHX (Non-ABS) 0601-56711 0601-56741 0601-56721 For 08-13 FLHR/C, FLHT/C/CU, FLHTK, FLHX, FLTRU, FLTRX (w/ ABS) (uses existing lower brake line) - 0601-5675 - 1 Not for use on CVO models. 11/4" VIKING HANDLEBAR KITS • The only complete Handlebar Kits with matching braided cables and brake lines that include Magnum Viking Handlebars • Patented Viking handlebar internal design guarantees easy installation of complete wiring harnesses without taking away from the clean look of the peak • Novel design creates enough room to allow the complete wiring harness with factory vinyl covering and the terminal connections, along with their respective shrink sleeve to easily pass through without chaffing • Using a unique flaring process, the burr-free internal radius creates a generous pocket of additional clearance within the troublesome peak of the handlebar • To make wiring installations even easier, Magnum preloads the bars with E-Z pull-thru plastic woven sleeving • Insert the wiring harness into the sleeving and pull through; it's that simple • Aggressive looking Viking handlebars are manufactured with the highest quality construction, work with standard controls, including hydraulic clutch, and feature gloss black finishes for an unsurpassed appearance • Each 11/4" diameter handlebar is CNC mandrel bent for an accurate fit, incorporate wrist angles engineered for riding comfort, have 1" diameter center sections, 31/2" on-center knurling, and feature machined control mounts (not swaged) plus burr free internal wiring holes and electronic throttle control slots PART # SUG. RETAIL 0601-5671 $699.95 0601-5672 789.95 0601-5673 839.95 PART # SUG. RETAIL 0601-5674 $776.95 0601-5675 719.95 0601-5676 1,018.95 PART # SUG. RETAIL 0601-5677 $761.95 0601-5678 1,010.95 0601-5679 1,010.95 PART # SUG. RETAIL 0601-5680 $756.95 0601-5681 756.95 0601-5682 867.95 PART # SUG. RETAIL 0601-5683 $867.95 0601-5684 970.95 PRICE LIST NOTE: Cable and line lengths are based on using 2" risers; except for Touring models. NOTE: 10" kits do not include wiring extension as the stock wiring should work for most applications. NOTE: Viking Handlebars have a 1" diameter center section and fit 1" risers. Models originally equipped with handlebars that have a center section diameter larger than 1" will require changing the risers to a 1" ID version. Examples would be, but not limited to FLSTF, FLSTFB and some CVO models. Please check before ordering. • Kits are available in Bagger or Ape Hanger styles for select ABS and non-ABS Harley-Davidson®motorcycles with 10", 12", 14" and 16" height options • Kits include: Magnum Viking Handlebars, throttle and idle cables or Throttle-By-Wire extensions, clutch cable or hydraulic clutch line, brake lines, copper crush washers, hardware and any necessary switch or turn signal extensions • Cables and brake lines feature Black Pearl braid with highly polished black chrome-plated fittings • All cables are a low effort, high-efficiency design that meets or exceeds all OE specifications for fitment, construction and endurance • Kits for dual disc models include a brazed manifold that eliminates leaks, alignment problems and unattractive threaded connections • Brake lines are compliant with all DOT FMVSS-106 Specifications US Patent # 10,882,578 0601-5682 0601-5680
APRIL 2023 THE DRAG SPECIALTIES 11 dragspecialties.com 41MM RAKED TRIPLE TREE • CNC-machined billet aluminum • Stem threads into underside of top triple tree for cleaner look • Available in 5° rake • Elite smooth design with a Night Series finish • Comes with forkstop kit • Made in the U.S.A. NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine which degree of rake is most suited for your application. Trees with more than 3° rake should not be used in stock frame applications. PART # DESCRIPTION SUG. RETAIL 0408-0422 For 00-10 FXST/FXWG and custom applications $778.95 BILLET MIRRORS • 6” stems machined from billet aluminum for a custom look • 3” x 5” convex mirrors for better field of vision • Matte black finish • Fit all models with hole-thru mounting • Sold in pairs PART # DESCRIPTION SUG. RETAIL 0640-1677 Billet mirrors $109.95 OIL PRESSURE GAUGE KITS • CNC-machined billet aluminum gauge bracket • Oil gauge features a stainless steel gauge housing and glass lens; each gauge is filled with vibration dampening glycerin for easy viewing when riding • Braided stainless steel oil hose for a performance look • Mounts to factory rocker box top on M-Eight engines PART # DESCRIPTION SUG. RETAIL FOR 17-22 M-EIGHT 2212-0870 Chrome $199.95 2212-0871 Black anodized 199.95 CUSH FOOTPEGS • Cush footpegs feature an oversized honeycomb rubber design that reduces vibration and increases foot traction through its knurled diamond outer surface • Forged billet aluminum center/clevis with a hollow center for reduced weight • Reduced length for increased ground clearance • Laser engraved Arlen Ness logo NOTE: See page 1773 of the 2023 Drag Specialties FatBook for an explanation of footpeg mount styles. PART # DESCRIPTION SUG. RETAIL M-EIGHT SOFTAIL/ELW DRIVER FOOTPEGS (PR.) 1620-2416 Black $89.95 1620-2417 Chrome 89.95 MALE MOUNT FOOTPEGS (PR.) 1620-2414 Black 89.95 1620-2415 Chrome 89.95 1620-2415 1620-2416 2212-0870 2212-0871
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 12 BILLET COUNTY FLOORBOARDS • Machined billet aluminum floorboards fit all baggers, including Dyna Switchback • Feature machined aluminum clevis • Designed for improved grip with a moto inspired look and feel • Measures 11½" x 4" • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 80-22 FLHT/FLHR/FLHX/FLTR/FLTRU/FLTRK/FLTRX, 09-13 H-D FL TRIKE, 86-17 FLST AND 12-16 FLD 1621-1128 Raw $449.95 1621-1129 Black 449.95 BILLET COUNTY FOOTPEGS • Billet aluminum performance footpegs featuring a stainless-steel clevis • Sold in pairs • Made in the U.S.A. NOTE: See page 1773 of the 2023 Drag Specialties FatBook for an explanation of footpeg mount styles. PART # DESCRIPTION SUG. RETAIL MALE MOUNT 1620-2433 Raw $199.95 1620-2434 Black 199.95 PART # DESCRIPTION SUG. RETAIL FOR M-EIGHT SOFTAIL (DRIVER MOUNT) 1620-2435 Raw $199.95 1620-2436 Black 199.95 BILLET COUNTY BRAKE PEDALS • Machined billet aluminum brake pedal for Touring/ Softail has an aggressive yet subdued look • Stock length, sold each • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 84-22 FLT/FLHT/FLHX/FLTRX/FLTRU/FLTRK, FLHTCUTG, 87-17 FLST/C/FLSTF/FLSTN, 12-16 FLD 1610-0661 Raw $99.95 1610-0662 Black 99.95 BILLET COUNTY SHIFT LEVER • Machined billet aluminum shift lever • Sold each • Shift peg sold separately • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FITS 88-22 TOURING MODELS, FXR, 86-17 SOFTAIL AND 09-22 TRIKE MODELS 1603-0386 Raw $99.95 1603-0387 Black 99.95 1610-0662 1610-0661 1620-2434 1620-2433 1621-1128 1621-1129 1603-0386
APRIL 2023 THE DRAG SPECIALTIES 13 dragspecialties.com PART # DESCRIPTION SUG. RETAIL FOR 17-20 FLHT/FLHR/FLHX/FLTRX MODELS 1105-0261 Gloss finish $209.95 PART # DESCRIPTION SUG. RETAIL FOR 17-20 FLHT/FLHR/FLHX/FLTRX MODELS (CONT) 1105-0262 Matte finish $209.95 HYDRAULIC CLUTCH ACTUATOR COVERS • Carbon fiber construction • Available with a gloss or matte finish • Direct bolt-on replacement 1105-0261 1105-0262 PART # DESCRIPTION SUG. RETAIL FOR 17-22 M-EIGHT 0940-2057 Black $77.95 0940-2058 Chrome 77.95 PART # DESCRIPTION SUG. RETAIL FOR 99-17 TWIN CAM 0940-2055 Black $77.95 0940-2056 Chrome 77.95 DIAMONDBACK POINTS COVERS • CNC-machined from billet aluminum • Made in the U.S.A. 0940-2057 0940-2056 PART # DESCRIPTION SUG. RETAIL FOR 21-22 FLHXS/FLHRXS/FLTRXS, 18-22 FLHCS/FLFBS/FXBBS/FXBRS/FXFBS WITH OVAL AIR CLEANER (2.3" W X 7.4" L) 1014-0362 Black, dimpled $178.95 1014-0363 Chrome, dimpled 178.95 1014-0366 Black, diamondback 191.95 1014-0367 Chrome, diamondback 191.95 PART # DESCRIPTION SUG. RETAIL FOR 99-13 FLHT/FLHR/FLHX/FLTR, 00-16 FXST/FLST (EXCEPT FXS/FLS/FLSTB), 99-07 DYNA MODELS AND NESS BIG SUCKER, HD SCREAMIN' EAGLE STAGE 1 AIR CLEANERS (51/2" DIAMETER) 1014-0364 Black, diamondback $191.95 1014-0365 Chrome, diamondback 191.95 AIR CLEANER COVER INSERTS • CNC-machined billet aluminum construction • Dimpled or diamondback styles available • Sold each • Made in the U.S.A. 1014-0362 1014-0367 1014-0364 1014-0365 PART # DESCRIPTION SUG. RETAIL 1011-4647 For 20-22 Challenger/Dark Horse/Limited $27.95 OEM-STYLE REPLACEMENT AIR FILTER ELEMENT • High-quality paper filter medium • Meets or exceeds OEM specifications • For use with OEM stock air filter housings • See page 83 of the 2023 Drag Specialties & Parts Unlimited Indian catalog for additional Drag Specialties OEM-style replacement air filter elements
APRIL 2023 THE DRAG SPECIALTIES dragspecialties.com 14 LEGIT ELYPSE 2-1 LED TURN SIGNALS • White running and full contrast amber turn function • Engineered in Germany with SMD-LED technology • CNC-machined billet aluminum housings • Chrome-plated • Measures 11" L x 6.5" W x 2.5" H • Sold in pairs PART # DESCRIPTION SUG. RETAIL 2040-3029 For 06-22 FLHT/FLHR/FLHX models $249.99 PROBEAM® FRONT HALO TURN SIGNAL INSERTS • Front turn signals • Amber bullet lenses • 24 running light halo LEDs • 12 center turn signal LEDs • 1157 bulb base • Plug and play installation • DOT/SAE compliant • Sold in pairs 2020-2136 2020-2137 PART # DESCRIPTION SUG. RETAIL WITH TOP LICENSE PLATE ILLUMINATION WINDOW 2010-1493 Red $149.99 2010-1495 Smoke 149.99 PART # DESCRIPTION SUG. RETAIL WITHOUT LICENSE PLATE ILLUMINATION WINDOW 2010-1494 Red $149.99 2010-1496 Smoke 149.99 TRACER US FLAG LED TAILLIGHTS • Feature a fully-diffused LED lighting system • Significantly enhance your bike with style and visibility • Available in red or smoke polycarbonate lenses with or without license plate illumination window • Direct plug-and-play replacement for most stock fender-mounted “eraser-style” taillights on 1999-later H-D models FOR MOST 99-22 H-D MODELS EQUIPPED WITH AN OEM SQUAREBACK-STYLE TAILLIGHT 2010-1496 2010-1493 MAD DOG MOUNTING SYSTEMS • Pivot Shaft will stabilize swingarm movement thus improving control at all speeds • A pair of cylindrical style metal bushings with an inner metal layer encased in vulcanized rubber provide superior long lasting vibration isolator • Black pivot blocks and pivot shaft included • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0502-0597 For 02-12 FLHT/FLHR/FLHX/FLTR/FLTRX/FLTRU models w/ stock .750" pivot shaft $760.95 0502-0596 For 80-01 FLT/FLHT/FLHR/FLTR models w/ stock .629" pivot shaft 760.95 0502-0599 For 82-94, 00 FXR models w/ aftermarket conversion .750" pivot shaft installed 760.95 0502-0598 For 82-94, 00 FXR models w/ stock .629" pivot shaft 760.95 0502-0596 PART # DESCRIPTION SUG. RETAIL 2020-2136 For US models w/ 1157 bases and OEM bullet-style lenses, except 16-23 CVO models $124.95 2020-2137 For 16-22 FLHXSE, FLHTKSE, 20-22 FLHTCUTGSE, 16 FLTRUSE, 18-22 FLTRXSE, 16-17 FXSE models w/ JAE bases 124.95
APRIL 2023 THE DRAG SPECIALTIES 15 dragspecialties.com EXTENDED-STYLE LUGGAGE RACK FLAG MOUNTS WITH FLAG • High-quality solid with a black PTFE coated finish • Fits 5/8" horizontal round bars commonly found on the Tour Pack luggage rack or detachable Air Wing rack • Mounts extend outward from racks to make a little more room for bags • 9" or 13" pole with standard cone topper • Choice of 6" x 9" or 10" x 15" American flag • Sold each • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL EXTENDED STYLE 5/8" ROUND BAR LUGGAGE RACK MOUNTS 0521-1971 9" Pole, w/ 6" x 9" flag $84.95 0521-1972 13" Pole, w/ 10" x 15" flag 99.95 SADDLEBAG BAR FLAG MOUNTS WITH FLAG • Polished black Teflon mounts attach 3/4" saddlebag bars; will not crack chrome on bag bar • Features a strong bore fitting • Includes an American flag; other flags are available; sold separately • Replacement 3/8" diameter stainless steel pole in interchangeable with all Pro Pad mounts • Available with 6" x 9" flag or 10" x 15" flag • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 3/4" BAR FIXED UPRIGHT MOUNT 0521-1959 W/ 6" x 9" flag $84.95 0521-1960 W/ 10" x 15" flag 99.95 7/8" BAR FIXED UPRIGHT MOUNT 0521-1961 W/ 6" x 9" flag 84.95 1/2" BAR FIXED UPRIGHT MOUNT 0521-1962 W/ 6" x 9" flag 84.95 0521-1963 W/ 10" x 15" flag 99.95 FLAG MOUNTS WITH AMERICAN FLAG • Extends flagpole out approximately 1.25" • High-quality PTFE coated stainless steel • Includes Alien keys for easy installation • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FITS .51" HORIZONTAL ROUND BAR (FOR PINNACLE LUGGAGE RACK) 0521-1969 9" Pole, 6" x 9" flag $84.95 0521-1970 13" Pole, 10" x 15" flag 99.95 FITS .765" HORIZONTAL ROUND BAR (FOR LUGGAGE ON DETACHABLE SISSY BAR) 0521-1973 9" Pole, 6" x 9" flag 84.95 FITS .765" VERTICAL ROUND BAR FOR CHIEF CLASSIC AND CHIEF VINTAGE QUICK RELEASE (PASSENGER SISSY BAR) 0521-1976 9" Pole, 6" x 9" flag 84.95 SQUARE SISSY BAR RACK FLAG MOUNTS WITH FLAG • 304 stainless steel with a black PTFE coated mount bolts directly to the square 5/8" sport racks on Softail, Sportster and Dyna Glide • Mount, as well as pole, can be easily detached via a small setscrew • Includes an American flag • Other flags also available; sold separately • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR SOFTAIL, SPORTSTER AND DYNA GLIDE 0521-1979 W/ 6" x 9" flag $79.95 0521-1980 W/ 10" x 15" flag 94.95 PART # DESCRIPTION SUG. RETAIL FOR 1/2" SQUARE SISSY BARS 0521-1981 W/ 6" x 9" flag $79.95 PART # DESCRIPTION SUG. RETAIL FOR 1/2" SQUARE SISSY BARS (CONT) 0521-1982 W/ 10" x 15" flag $94.95 SIDE MOUNT SISSY BAR FLAG MOUNTS WITH FLAG • Black PTFE coated finish 304 stainless steel mount bolts directly to the square 1/2" sissy bars on most Softails, Sportsters and Dynas • Mount, as well as pole, can be easily detached via a small setscrew • Includes an American flag • Other flag also available; sold separately • Available with 6" x 9" or 10" x 15" flag • Made in the U.S.A. 0521-1980 0521-1976 0521-1970 0521-1981 0521-1959 0521-1962 0521-1971
APRIL 2023 THE DRAG SPECIALTIES 16 9901-3203 HOGTUNES Audio solutions for every rider – that is the Hogtunes mission statement. Their new cut-in speaker lid kits with speakers let you add the power of Hogtunes audio to motorcycles not originally equipped with built-in saddlebag speakers. All kits include templates to simplify installation along with all necessary wiring for plug-and-play. RETRO CUT-IN SPEAKER LID KIT WITH SPEAKERS AND AMPLIFIERS • Factory Lid Cut-in kit with two REV 225-RM amplifiers, one pair of Hogtunes 462F-RM Fairing Speakers and one pair Hogtunes 692-XL 6" x 9" lid speakers • Includes single use templates for cutting lids, custom tooled speaker adaptors, Batwing and Road Glide front grills with chrome and blacked-out badges, custom tooled silicone speaker gaskets, all required wiring and plug & play harnesses PART # DESCRIPTION SUG. RETAIL 4405-0894 For 14-23 FLHT/FLHX/FLTRU/FLTRK models w/ factory saddlebag lids $1,499.95 RETRO CUT-IN SPEAKER LID KIT WITH SPEAKERS • Factory Lid Cut-in kit with XL Series 6” x 9” 2-ohm, 200 watt lid speakers • Includes single use templates for cutting lids, custom tooled speaker adaptors, grills with chrome and blacked-out badges, custom tooled silicone speaker gaskets, all required wiring and plug & play harnesses PART # DESCRIPTION SUG. RETAIL 4405-0893 For 14-23 FLHT/FLHX/FLTRU/FLTRK models w/ factory saddlebag lids $549.95 RETRO CUT-IN SPEAKER LID KIT WITHOUT SPEAKERS • Includes single use templates for cutting lids, custom tooled speaker adaptors, grills with chrome and blacked-out badges, custom tooled silicone speaker gaskets, all required wiring and plug & play harnesses PART # DESCRIPTION SUG. RETAIL 4405-0892 For 14-23 FLHT/FLHX/FLTRU/FLTRK models w/ factory saddlebag lids $299.95
www.dragspecialties.comRkJQdWJsaXNoZXIy OTcxOTk3