MID-LENGTH SUPER BIKE EXHAUST SYSTEM* • Hand TIG-welded stainless steel construction • 13/4 “ headpipes step up to 17/8” into the collector to increase flow and improve performance • 4” diameter straight can 11” muffler body includes matching aluminum end cap • Removable spiral-core louvered baffle features an all-new aggressive sound • 18mm and 12mm O2 ports with adapters and plugs • Partial heat shields and mounting hardware included • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1800-2539 For 17-22 FLHT/FLHTK/FLHR/FLHX/FLTRU/FLTRK models (except CVO models) $1,399.95 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES THE DRAG SPECIALTIES APRIL 2022 dragspecialties.com
APRIL 2022 THE DRAG SPECIALTIES dragspecialties.com 2 SADDLEMEN Want great style and long-haul comfort? Switch up to a Saddlemen seat for your ride. They offer a large variety of shapes, styles and stitch patterns on their seats to give you the best fit and long-haul comfort. In addition, Saddlemen now has DXT saddlebag mount kits available to fit FXD and M-Eight Softail models. HEATED ROAD SOFA LS SEAT • Lattice stitch (LS) seat infuses old-school lattice stitch retro styling with a modern twist • Two-level heat adjustment that easily connects to bike’s electrical system • Independently controlled heating elements for rider and passenger • Brightly colored LEDs indicate level of heat • Seat’s styling and function is unaffected by switches or wiring • Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/back pressure for maximum long-range comfort • Features a combination of progressive density foam and GelCore™ inserts for superior driver and passenger comfort • Has a perforated, ventilated leather cover for the ultimate in luxurious comfort, feel and looks • Protective rain cover included • Passenger pillion area has received special attention for comfort and to allow a clear view of the road ahead • Available with driver’s backrest • For the full line of Heated Road Sofa LS Seats, see page 269 of the 2022 Drag Specialties FatBook catalog • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 97-07 FLT/FLHT/FLTR (EXCEPT FLHX/FLHR) 0801-1390 Heated Road Sofa LS seat w/ driver’s backrest $987.00
APRIL 2022 THE DRAG SPECIALTIES 3 dragspecialties.com HEATED ROAD SOFA CF SEAT • Constructed from contrasting carbon fiber weave and SaddleHyde™ • Two-level heat adjustment that easily connects to bike’s electrical system • Independently controlled heating elements for rider and passenger • Brightly colored LEDs indicate level of heat • Styling and function are unaffected by switches or wiring • GelCore™ in front and rear reduces tailbone pressure and increases circulation and comfort for both driver and passenger • Tall lumbar support and wide driver saddle support the back and legs for superior comfort, while the streamlined nose improves the rider’s reach to the ground • Available with driver’s backrest • For the full line of Saddlemen Heated Road Sofa CF Seats, see page 269 of the 2022 Drag Specialties FatBook catalog • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 97-07 FLT/FLHT/FLTR (EXCEPT FLHX/FLHR) 0801-1392 Heated Road Sofa CF seat w/ driver’s backrest $962.00 HEATED ROAD SOFA PILLOW TOP SEAT • Two-level heat adjustment that connects easily to bike’s electrical system • Independently controlled heating elements for rider and passenger • Brightly colored LEDs indicate level of heat • Seat’s styling and function is unaffected by switches or wiring • Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/back pressure for maximum long-range comfort • Features a combination of progressive-density foam and GelCore™ inserts for superior driver and passenger comfort • Pillowed soft upholstery cover backed by a compliant foam layer under the cover to provide incredible comfort and style • Classic styled button-tufted cover • Available with driver’s backrest • For the full line of Saddlemen Heated Road Sofa Pillow Top (PT) Seats, see page 270 of the 2022 Drag Specialties FatBook catalog • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 97-07 FLT/FLHT/FLTR (EXCEPT FLHX/FLHR) 0801-1394 Heated Road Sofa PT seat w/ driver’s backrest $962.00
APRIL 2022 THE DRAG SPECIALTIES dragspecialties.com 4 ROAD SOFA LS SEAT • Lattice stitch (LS) seat infuses old-school lattice stitch retro styling with a modern twist • Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/back pressure for maximum long-range comfort • Features a combination of progressive density foam and GelCore™ inserts for superior driver and passenger comfort • Perforated, ventilated leather cover for the ultimate in luxurious comfort, feel and looks • Protective rain cover included • Passenger pillion area has received special attention for comfort and to allow a clear view of the road ahead • Available with driver’s backrest • For the full line of Saddlemen Road Sofa LS Seats, see page 271 of the 2022 Drag Specialties FatBook catalog • Made in the U.S.A. ROAD SOFA SEAT • Constructed from contrasting carbon fiber weave and SaddleHyde™ • GelCore™ in front and rear reduces tailbone pressure and increases circulation and comfort for both driver and passenger • Tall lumbar support and wide driver saddle support the back and legs for superior comfort, while the streamlined nose improves the rider’s reach to the ground • Available with driver’s backrest • For the full line of Saddlemen Road Sofa Seats, see page 270 of the 2022 Drag Specialties FatBook catalog • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 97-07 FLT/FLHT/FLTR (EXCEPT FLHX/FLHR) 0801-1391 Road Sofa seat w/ driver’s backrest $801.00 PART # DESCRIPTION SUG. RETAIL FOR 97-07 FLT/FLHT/FLTR (EXCEPT FLHX/FLHR) 0801-1389 Road Sofa LS seat w/ driver’s backrest $826.00 ROAD SOFA PILLOW TOP SEAT • Refined split-cushion design separates the seating surface from the lumbar support to reduce tailbone/back pressure for maximum long-range comfort • Features a combination of progressive density foam and GelCore™ inserts for superior driver and passenger comfort • Pillowed soft upholstery cover backed by a compliant foam layer under the cover to provide incredible comfort and style • Classically styled button-tufted cover • Available with driver’s backrest • For the full line of Saddlemen’s Road Sofa Pillow Top Seats, see page 271 of the 2022 Drag Specialties FatBook catalog • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 97-07 FLT/FLHT/FLTR (EXCEPT FLHX/FLHR) 0801-1393 Road Sofa PT seat w/ driver’s backrest $801.00
APRIL 2022 THE DRAG SPECIALTIES 5 dragspecialties.com SPEED MERCHANT PRO SERIES SEATS • Slim design follows the contour of the frame • Perforated leather center piece with diamond stitching • Combines a GelCore™ interior and Ultra-Foam to create a perfect balance of rigidity and user compliance • Ultra-Foam’s unique molding process creates an element-resistant self-skinning process that seals the foam and enhances the seat’s durability • For the full line of Saddlemen Speed Merchant Pro Series Seats, see page 317 of the 2022 Drag Specialties FatBook catalog • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0802-1447 For 18-22 FXBB/FXBBS/FXST $500.00 0802-1448 For 18-22 FXLR/FXLRS/FXLRST/FLSB 500.00 DXT SADDLEBAG MOUNT BRACKETS • Designed to install DXT saddlebags on listed models • Black powdercoated finish • Bikes with strut-mounted turn signals will require turn signal relocation • Require an aftermarket exhaust that is lower than the swingarm pivot in order to clear the DXT saddlebags • See page 226 of the 2022 Drag Specialties FatBook for DXT Saddlebags PART # DESCRIPTION SUG. RETAIL 3501-1913 For 18-22 FXST/FXBB/FXBBS/FXFB/FXFBS/FXLR/FXLRS/FLSB/FLDE/FLHC/FLHCS/FLSL $130.00 3501-1914 For 96-17 FXD 130.00 FAIRING SUPPORT BRACKETS • Constructed of laser-cut steel and formed with a powdercoat black finish • Allow user to remove the engine guard from the bike for a clean look • Also allow for the use of the LA Choppers Twin Peaks engine guard on 2021 FLTRXS models • Include all necessary hardware to install • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 2330-0262 For 04-21 FLTRX/FLTRU/FLTRK models $109.95 3501-1913 3501-1914 0802-1447
APRIL 2022 THE DRAG SPECIALTIES dragspecialties.com 6 HURRICANE BACKPACK • 100% waterproof backpack made from PVC Tarpaulin • All seams are electronically heat welded • Watertight roll closure with quick-release buckles • UV-coated outer material cleans easily and prevents slipping or marking • Securely mounts using patented RIGG STRAP® system which can also be used as a separate tie down system • Padded back panel is sectionalized to allow for better airflow • Back panel opens to conceal backpack straps when used as a tail pack • Dual quick-release closure either over the top or down the sides • Purge valve makes for easy compression • Inner sleeve to hold most folders, notebooks, tablets and laptops up to 15” • Inner loops for attaching smaller items for quick access • Front MOLLE panel includes a clear waterproof document pocket • Side bottle pocket large enough to hold 30 oz. bottles • Reflective webbing for enhanced visibility • Backpack straps are adjustable and padded for comfort • Measures 12.5” L x 7” W x 21.5” H and holds 30L PART # DESCRIPTION SUG. RETAIL 3517-0517 Hurricane backpack $169.95 HURRICANE SADDLEBAGS • 100% waterproof made of PVC Tarpaulin • All seams are electronically heat welded • Watertight roll closure with quick-release buckles • UV-coated outer material cleans easily and prevents slipping or marking • Securely mounts using patented RIGG STRAP® system • Removable stiffener allows bag to hold its shape when empty • Side bottle pocket large enough to hold 30 oz. bottles • Side MOLLE panel for optional accessories • Each side is collapsible with compression straps for smaller loads • Firm internal back plate helps support bag • Replaceable back pad helps protect bags from contact with rack • Metal D rings can be used to mount dry roll bag on top • Purge valve for easy compression • Reflective accents for enhanced visibility • Includes two lightweight saddlebag liners • Main compartment measures 15” L x 8” W x 14” H • Holds 28 liters per side PART # DESCRIPTION SUG. RETAIL 3501-1898 Hurricane saddlebags $299.95 Back view
APRIL 2022 THE DRAG SPECIALTIES 7 dragspecialties.com HURRICANE ROLL BAG • 100% waterproof made from PVC Tarpaulin • All seams are electronically heat welded • Watertight roll closure with quick-release buckles • UV-coated outer material cleans easily and prevents slipping or marking • Securely mounts using patented RIGG STRAPS® system which can also be used as a separate tie down system • Purge valve makes for easy compression • Measures 15” L x 8” W x6” H and holds 10L PART # DESCRIPTION SUG. RETAIL 3530-0027 Hurricane roll bag $69.95 HURRICANE DUFFLE BAGS • 100% waterproof, made from PVC Tarpaulin • All seams are electronically heat welded • Watertight roll closure with quick-release buckles • UV-coated outer material cleans easily and prevents slipping or marking • Securely mounts using patented RIGG STRAP® system which can also be used as a separate tie down system • Removable internal panels help bag hold its shape • Can be mounted across or along seat or tail section • Purge valve makes for easy compression • Dual-purpose carry handles can be used as compression straps • Reflective accents for enhanced visibility • 25L model measures 17” L x 9” W x 10” H • 40L model measures 20” L x 11” W x 11” H PART # DESCRIPTION SUG. RETAIL 3530-0028 25L $109.95 3530-0029 40L 129.95 3530-0028 3530-0029
APRIL 2022 THE DRAG SPECIALTIES dragspecialties.com 8 TRAILS END LITE TANK BAG • UltraMax® fabric for maximum UV protection • Quick-release straps for easy attachment • Mounts to most fuel tanks • Water-resistant lockable zippers • Inner self-fastening straps • Bag holds its shape and reverse coil zippers help keep out dust and dirt • Measures 101/4” L x 61/2” W x 4” H and holds 4.4L PART # DESCRIPTION SUG. RETAIL 3502-0529 Trails End tank bag $79.95 TRAILS END LITE TAIL BAG • Lifetime Warranty • Industry-leading UltraMax® fabric with maximum UV protection • Heavy-duty webbing and buckles for easy and secure mounting • Small size is perfect for most dual sport and enduro motorcycles • Can mount to most racks or seats • Rigid construction with reflective piping • Bag holds shape even when empty • Water-resistant lockable zippers help keep out dust and dirt • Inner self-fastening straps to better secure contents • MOLLE panel on lid allows other items to be strapped down • Rubberized carry handle for easy transport • Main compartment measures 93/4” L x 81/2” W x 4” H and holds 5.5L PART # DESCRIPTION SUG. RETAIL 3516-0385 Trails End Adventure tail bag $109.95
APRIL 2022 THE DRAG SPECIALTIES 9 dragspecialties.com METHOD NO FLEX INVERTED FORK LEGS • Performance driven Dual Disc design • Integrated “No Flex” fork brace flows seamlessly with the lines of the fork legs and adds stability to the front end for improved handling • 100% billet aluminum construction • CNC-machined fender mounts and brake caliper mounts • Choose Factory/Axial style caliper mounts or Radial style caliper mounts • Fork legs with Factory/Axial style caliper mounts are designed for 11.8” front rotors (14” oversized rotors can be used only when adding Arlen Ness 14” brake calipers; will not work with Arlen Ness or aftermarket caliper adapters) • Fork legs with Radial style caliper mounts have a 100mm bolt pattern (accepts both 11.8” and 14” rotors; 14” requires custom caliper spacers) • Designed for 18” to 21” front wheels • 18” fat front 180mm wheels require an Arlen Ness fat front fender and exposed fork tubes (no fork boots) • 19” front wheels accept factory front fenders and Arlen Ness/a ftermarket fenders • 21” front wheels require an Arlen Ness or aftermarket front fender (custom fork brace spacers may be required) • Accepts factory or aftermarket performance suspension internals • Lightweight axle with billet 12-point style axle nuts included • Includes set of fork seals and billet dust seal covers NOTE: Arlen Ness 14” six-piston brake calipers are required when using 14” oversized front brake rotors. PART # DESCRIPTION SUG. RETAIL FOR 14-21 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK 0403-0165 Fork legs w/ Factory/Axial style caliper mounts $999.95 0403-0166 Fork legs w/ Radial style caliper mounts 999.95 DOWNDRAFT MIRRORS • Elongated, smooth flowing design • Mirror head and stem forged from billet aluminum • Heavy-duty stainless steel internal pivot hardware • Medium sized mirror head blends in with the lines of the motorcycle, but shaped for great rear vision • 5.87” W x 2.303” T • Standard and metric mounting hardware included • Laser engraved Arlen Ness logo • Sold in pairs PART # DESCRIPTION SUG. RETAIL 0640-1521 Black anodized $199.95 0640-1522 Chrome 199.95 CHAIN CONVERSION KIT • 24 tooth front sprocket machined from nickel chromoly steel • 51 tooth rear sprocket machined from billet aluminum with a black anodized finish • Offset spacer for proper chain alignment • Machined from billet aluminum • For use with .530 pitch chains PART # DESCRIPTION SUG. RETAIL 1210-2513 For 18-21 Softail models $379.95 0403-0165 0403-0166 0640-1522 0640-1521
APRIL 2022 THE DRAG SPECIALTIES dragspecialties.com 10 POWER COMMANDER V* • Fuel and timing control • Rev Xtend increases Rev limit • The Power Commander V can read the exact engine temperature through the bike’s ECM, which allows the tuner to choose how much fuel to add during cold starts • Cold starting on heavily modified engines should be more controllable and easy to adjust • USB powered from computer • Two position map-switching function built-in (switch not included) • Can add any SPST switch and toggle between two different fuel/timing maps • Gear/speed input allows for map adjustment based on gear • Analog input allows user to install any 0-5 volt sensor • Builds an adjustment table based on analog input, such as boost or temperature • Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected • Ten throttle position columns • World’s largest dyno-tested map database • Enhanced “accel pump” utility • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1020-34901 For 21 FLHT/FLHX/FLHR/FLTRX/FLTRU $489.95 1 Includes ignition adjustment. Fi2000 POWRPRO BLACK* • Requires no dyno-tuning – plug it in and ride • PowrPro Black analyzes, tunes and adjusts your air/fuel ratio for peak performance instantaneously • Tunes acceleration fuel delivery in every gear for peak performance • Works with stock or modified engines, air cleaners and exhaust systems • Can fine-tune the non-acceleration air/fuel curves using the Bluetooth® app • Can tune engine fuel delivery in specific ranges, check rpm, read fuel injector pulse width and duty cycle, and add or remove fuel in low- or mid-range rpm PART # DESCRIPTION SUG. RETAIL 1020-3460 For 16 Chief Dark Horse, 14-16 Chief Classic/Chief Vintage $529.95 HIGH-FLOW AIR FILTER™* • Designed to provide increased performance • Pleated media provides a large filtration area offering long service intervals • Multi-layers of woven cotton gauze media offer excellent filtration • Fits directly into OEM airbox with application specific Sealing Bead to ensure a precise fit • Fuel-management modifications are not required for increased performance • Washable and reusable, pre-oiled and ready to ride • Made in the U.S.A. for over 50 years PART # FITS MODEL SUG. RETAIL 1011-4574 For 20-21 Challenger/Dark Horse/Limited $99.99 PVC *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
APRIL 2022 THE DRAG SPECIALTIES 11 dragspecialties.com VANCE & HINES For more than 40 years, Vance & Hines has been a leader in motorcycle performance. Their high-performance air intake kits are engineered to maximize airflow for a boost in performance, along with providing a unique custom look for your bike. Bolt one on and give your bike the Vance & Hines performance edge. VO2 CAGE FIGHTER AIR INTAKE KIT* • Designed for maximum airflow to the filter element while providing a custom look • Includes washable high-flow filter element • Features large inlet backing plate and billet venturi • Available in black contrast • Made in the U.S.A. NOTE: CVO/114” models and models with SE Stage 1 air cleaners will require support bracket H-D part #16400049 to install. PART # DESCRIPTION SUG. RETAIL 1010-2903 For 08-16 FLHT/FLHR/FLHX/FLTR/H-D FL Trikes, 16-17 FXDLS, 16-17 Softails, 14-15 FLSTNSE, 13-14 FXSBSE and 11-12 FLSTSE $299.99 NAKED VO2 AIR INTAKE* • A high-flow replacement kit with greater airflow • CNC-machined venturi • Includes a washable high-flow and reusable air filter • Larger inlet backing plate • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1010-28921, 2 For 17-21 FLHT/FLHR/FLHX/FLTRX/H-D FL Trike models, 18-21 Softail models $179.99 1 Will not accept stock cover, must use Vance & Hines Skullcap outer covers (sold separately, see page 675 of the 2022 Drag Specialties FatBook). 2 CVO/114” models and models with SE Stage 1 air cleaners will require support bracket H-D part #16400049 to install. *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
APRIL 2022 THE DRAG SPECIALTIES dragspecialties.com 12 BURLY BRAND Brothers Tom and Dan started bending tubing and getting it chrome-plated. That simple start was the birth of Burly Brand. More than three decades later, they continue to produce cool custom parts that are sought after around the world when you want to give your American V-Twin that “keep it custom” Burly Brand touch. 11/4” DOMINATOR HANDLEBARS • Provide a responsive handling position without sacrificing comfort or looks • Choose between straight riser or raked riser version • Tube diameter is 1.25”, stepped down to 1” for use with stock hand controls • Laser cut, welded, deburred and slotted for easy internal wiring • Bars are crowned for electronic Throttle-By-Wire applications • 12” and 14” bars require longer cables/lines/electrical for installation and will not fit models with integrated lower clamp BLACK POWDERCOAT SUG. RETAIL MATTE BLACK SUG. RETAIL END RISE WIDTH CENTER WIDTH PULLBACK STRAIGHT RISER 0601-5703 $275.95 0601-5704 $275.95 10” 29” 31/2” 4” 0601-5705 275.95 0601-5706 275.95 12” 29” 31/2” 4” 0601-5707 275.95 0601-5708 275.95 14” 29” 31/2” 4” RAKED RISER 0601-5697 275.95 0601-5698 275.95 10” 29” 31/2” 5” 0601-5699 275.95 0601-5700 275.95 12” 29” 31/2” 5” 0601-5701 275.95 0601-5702 275.95 14” 29” 31/2” 5” 0601-5697 0601-5702 0601-5703 0601-5708 GLOSS BLACK REPLACEMENT LACED WHEELS • 40-spoke tube-type wheels feature gloss black powdercoat steel rims, chrome spokes and gloss black powdercoat steel hubs • Fully assembled and trued with bearings installed and end play set • Uses OEM mounting hardware; designed to use OEM-style rotors, pulleys and sprockets NOTE: Check clearance between front caliper and spokes before operating. Minor caliper spacing may be required. PART # DESCRIPTION VALVE STEM STYLE SUG. RETAIL FRONT WHEELS 0203-0672 19” x 2.5” for 08-17 FXD (w/o ABS) (single disc) CMV $405.95 0203-0671 19” x 2.5” for 00-03 FXD/B/C/L, 00-05 XL (single/dual disc); repl. OEM #43312-00A CMV 405.95 0203-0663 21” x 2.15” for 00-06 FXST/B/C, 00-05 FXDWG; repl. OEM #43700-00, 43671-00 CMV 405.95 0203-0668 21” x 2.15” for 00-03 FXD/B/C/L, 00-05 XL (single/dual disc); repl. OEM #43557-00, 43557-00A CMV 405.95 PART # DESCRIPTION VALVE STEM STYLE SUG. RETAIL FRONT WHEELS (CONT) 0203-0673 21” x 2.15” for 84-96 FXST, 93-96 FXDWG, 84-86 FXWG (single disc); repl. OEM #43671-84 CMV $405.95 0203-0669 21” x 2.5” for 99 FXD, 86-99 XL (single or dual disc); repl. OEM #43557-87 CMV 405.95 REAR WHEELS 0204-0571 16” x 3” for 86-96 FXST/FLST; 86-94 FXR; 91-96 FXD/FXDWG; repl. OEM #40975-86 SMV 405.95 0204-0575 17” x 4.5” for 08-17 FXD/FXDWG (w/o ABS) SMV 405.95 0204-0575
APRIL 2022 THE DRAG SPECIALTIES 13 dragspecialties.com QUICK CONNECT BRAIDED UPPER CLUTCH CABLES • Quick Connect braided upper clutch cables economically replace the OE upper cable section on 2018-2021 Softails and 2021 Touring models • Easily and quickly connects to the existing lower cable section • Significantly reduces installation time, plus there’s no need to drain transmission fluid • Unique design reuses OE cover and housing parts • Quick Connect cables feature the industry’s highest quality braid in two color choices to complement your bike: Black Pearl or KarbonFibr • KarbonFibr braid is created from metallic distinct black tone colored wire, blended and interwoven to mimic the distinct look of carbon fiber • Braid color and weave match on all Magnum control cables and brake lines • Crystal-clear outer jacket will never discolor and provides exceptional protection against scuffing paint and chrome • Black chrome-plated handlebar fittings • Low-effort, high-efficiency cable design meets or exceeds OE specifications for fitment, construction and endurance • Upper cables are made with anti-friction inner liners and are factory lubricated for smooth, consistent, long lasting operation • Assembled in the U.S.A. STOCK LENGTH FITS MODEL BLACK PEARL KARBONFIBR TOTAL LENGTH TRAVEL OEM # DRESSERS/TOURING For 21 FLTRK/FLTRX/FLTRXS 0652-2479 0652-2505 45” 25/16” 37200439 For 21 FLHR/FLHRXS 0652-2477 0652-2503 42” 25/16” 37200440 SOFTAIL For 20-21 FXLRS 0652-2473 0652-2499 34” 25/16” 37200433 For 18-20 FLDE, 18-21 FXFB/FXFBS, 19-20 FXDRS 0652-2474 0652-2500 36” 25/16” 37200219 For 19-21 FLSB, 18-21 FLSL/FXBR/FXBRS 0652-2475 0652-2501 38” 25/16” 37200215 For 18-21 FLHC/FLHCS, 18-20 FLXR 0652-2476 0652-2502 40” 25/16” 37200218 For 18-21 FLFB/FXBB/FXBBS/FXST, 18-21 FLFBS 0652-2477 0652-2503 42” 25/16” 37200216 ALTERNATE LENGTH BLACK PEARL KARBONFIBR TOTAL LENGTH TRAVEL FOR 21 FLTRK/FLTRX/FLTRXS/FLHR/FLHRXS, 18-20 FLDE, 18-21 FLHC/FLHCS/ FLSL/FLFB/FLFBS/FLXR/FXBB/FXBBS/FXBR/FXBRS/FXFB/FXFBS/FXST, 19-20 FXDR/FXDRS, 19-21 FLSB, 20-21 FXLR/FXLRS 0652-2473 0652-2499 34” 25/16” 0652-2474 0652-2500 36” 25/16” 0652-2475 0652-2501 38” 25/16” 0652-2476 0652-2502 40” 25/16” 0652-2477 0652-2503 42” 25/16” 0652-2478 0652-2504 44” 25/16” 0652-2479 0652-2505 45” 25/16” 0652-2480 0652-2506 46” 25/16” 0652-2481 0652-2507 48” 25/16” 0652-2482 0652-2508 50” 25/16” 0652-2483 0652-2509 52” 25/16” 0652-2484 0652-2510 54” 25/16” 0652-2485 0652-2511 56” 25/16” PRICE LIST PART # SUG. RETAIL 0652-2473 $92.95 0652-2474 92.95 0652-2475 92.95 0652-2476 93.95 0652-2477 98.95 0652-2478 98.95 0652-2479 98.95 0652-2480 98.95 0652-2481 98.95 0652-2482 104.95 0652-2483 104.95 0652-2484 104.95 0652-2485 104.95 0652-2499 95.95 0652-2500 95.95 PART # SUG. RETAIL 0652-2501 $95.95 0652-2502 96.95 0652-2503 101.95 0652-2504 101.95 0652-2505 101.95 0652-2506 101.95 0652-2507 101.95 0652-2508 107.95 0652-2509 107.95 0652-2510 107.95 0652-2511 107.95 Black Pearl KarbonFibr
APRIL 2022 THE DRAG SPECIALTIES dragspecialties.com 14 3” VELOCITY STACKS WITH BACKING PLATES* • High flow design billet aluminum construction • 4” opening with internal taper down to 62mm ID • Fits M-Eight throttle body three-hole bolt pattern • Impressive horsepower and torque gains on engines running modified and ported cylinder heads and intakes with larger throttle bodies • Great performance part for racing and for those who want to head to the track on the weekend • Includes the aluminum backing plate and needed hardware for standard head breathers • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 17-21 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK/H-D TRIKE AND 18-21 SOFTAILS 1010-2831 Raw machined aluminum with black backing plate $239.95 1010-2832 Raw machined aluminum with chrome backing plate 239.95 ROCKER SHAFT KITS • Designed with strength in mind • Over double the strength of factory rocker shafts • Best possible material and heat-treat process available to create the best rocker shaft on the market • Custom tooling was created to provide a countersink relief for the bolt/nut head versus machining away the entire end of the shaft per the factory design • Precision ground from 4140HT steel • Gas nitrated and final surface treated • Recommended for all M-Eight engines and especially for engines running higher lift camshafts and heavier valve spring pressures • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 17-21 TOURING AND 18-21 SOFTAILS 2401-1525 Rocker shafts and stud/nut kit (includes four shafts, eight studs and eight nuts) $319.95 2401-1524 Rocker shafts (includes four shafts only) 179.95 VENTED DIPSTICK REBUILD KIT* • Fits all Feuling vented dipsticks and includes replacement K&N® filter element, rubber umbrella flapper valve, filter element, setscrew, 545™ Loctite and zip ties • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1012-0254 Vented dipstick rebuild kit $69.95 REPLACEMENT FILTER ELEMENT* • Fits all Feuling oil tank breather kits (Green filter or K&N®) • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1012-0253 Replacement filter element $39.95 1010-2831 1010-2832 2401-1525 2401-1524 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
APRIL 2022 THE DRAG SPECIALTIES 15 dragspecialties.com LATITUDE LIGHTSTRIKE™ TAILLIGHTS WITH LICENSE PLATE HOLDER • Replaces the entire OEM lighting assembly for a complete rear end transformation • Features brilliant LIGHTSTRIKE™ LED run, turn and brake light that is fully customizable, with a variety of animated functions and strobe effects that stand out in traffic • Choose between 12 different power-on animations, 10 turn signal animations with strobe options, 3 brake animations and 5 brake burst modes • Easy plug-n-play installation • License plate mount has hidden fasteners for an extra-clean look • Available in chrome or black with red or light smoked lens NOTE: DOT compliant. PART # DESCRIPTION SUG. RETAIL FOR 14-22 FLHX/FLTRX/FLHRXS MODELS 2010-1461 Chrome w/ red lens $374.99 2010-1463 Black w/ red lens 374.99 2010-1462 Chrome w/ light smoked lens 374.99 2010-1464 Black w/ light smoked lens 374.99 2010-1462 2010-1464 2010-1461 TRUNK LIGHTS FOR TOUR-PAK® • Adds streamlined illumination to Tour-Pak lid • Lightstrike™ technology adds run, turn and brake functions as well as a strobe effect • Mounts with 3M® VHB™ adhesive • Plug-n-play installation PART # DESCRIPTION SUG. RETAIL FOR 14-22 TOURING MODELS W/ CHOPPED OR KING TOUR-PAK ® 2010-1457 Chrome, red lens $359.99 2010-1459 Chrome, light smoke lens 359.99 2010-1458 Black, red lens 359.99 2010-1460 Black, light smoke lens 359.99 CRANKSHAFT SENSOR • Advanced circuitry provides immunity from EMI, such as stray electromagnetic fields, power spikes and static electricity • Meets ISO standards • Fluorocarbon rubber oil seal ensures a secure fit • Sealed construction withstands extreme conditions PART # DESCRIPTION SUG. RETAIL 1022-0274 For 01-17 Twin Cam and 06-21 XL models (except 21 Sportster S/RH 1250S); repl. OEM #32707-01C $52.95 2010-1463 2010-1457 2010-1460
APRIL 2022 THE DRAG SPECIALTIES 16 9901-3002 CUSTOM HEAT SHIELDS • Provides maximum protection by dissipating and shielding heat that can damage brake lines, hoses and wiring, gas tanks, body parts, oil lines, cables and more • Protection up to 1350°F • Riveted standoffs create cooling air barrier • Outperforms glass fiber and metal shields • Flexible and easy to install • Fit up to 3.5” pipe • Sold each • Made in the U.S.A. SIZE PART # SUG. RETAIL 31/2” x 61/2”; brushed/onyx 1861-1558 $50.95 31/2” x 61/2”; brushed/titanium 1861-1559 49.95 31/2” x 61/2”; double black/onyx 1861-1562 70.95 4” x 8”; brushed/onyx 1861-1560 60.95 4” x 8”; brushed/titanium 1861-1561 59.95 4” x 8”; double black/onyx 1861-1563 74.95 1861-1558 1861-1559 1861-1561 1861-1562 FLEXIBLE HEAT SHIELDS • A flexible heat shield solution that looks great and outperforms other conventional heat shields available today • Onyx Series is made with heat-treated glass fiber and bonded with molten aluminum • Titanium Series is made with pulverized lava rock fabric • Inside materials are made of a specially treated, high temperature resistant fabric (89% silica) designed to withstand serious exhaust heat • Outer edge is finished off with an aggressive stitch for durability • Includes stainless steel hardware • Fit up to 3” pipe • Sold each • Made in the U.S.A. DESCRIPTION PART # SUG. RETAIL ONYX 4” x 8” 1861-1564 $49.95 TITANIUM 4” x 8” 1861-1568 41.95 4” x 12” 1861-1569 46.95 6” x 12” 1861-1565 51.95 6” x 24” 1861-1566 71.95 6” x 36” 1861-1567 97.95 1861-1564 1861-1566 1861-1568
www.dragspecialties.comRkJQdWJsaXNoZXIy OTcxOTk3