2023 Alpinestars Road Apparel Collection
2
3
The Racing Absolute is a top-level professional-grade racing suit incorporating all the same lightest-weight and mostadvanced materials and technologies that the world’s fastest MotoGP and WorldSBK riders wear on the track. Aside from its full kangaroo leather construction, with dual kangaroo leather layers in all the highest abrasion prone areas like the elbows, forearms, seat, hips, and back, the Racing Absolute V2 also features Kevlar® reinforced stretch inserts at the crotch and inner arms and armpits. The bonded Kevlar® Grid provides not only increased cut, tear, and abrasion resistance, but highly reduced heat transfer to the rider’s body generated from any friction during a slide on the asphalt. 1. Another key material’s technology advancement found in the Racing Absolute v2 is the use of Alpinestars Composite Stretch technology, or A-CS®Tech for short. A-CS®Tech is found all throughout the suit’s, side torso, shoulder blades, and upper knee areas. Replacing the leather accordion panels that precede it in those areas, A-CS® Tech material provides not only increased breathability, comfort, and freedom of movement, but also offers a lower weight and a lower profile than accordion leather (about 9% lighter weight panels). Leather accordion panels are still present in the lower back and main flexion zones. Additionally, the A-CS® technology features a good level of stretchability of about 30% elongation, where tear resistance has increased by 288% compared to HRSF, or Hyper Resistant Stretch Fiber, and where cut resistance has increased by 600% versus leather, all while having highly comparable performance to kangaroo leather, and even higher impact abrasion test results. The use of A-CS® Tech, signifies a noteworthy advancement and improvement in protective performance materials. 2. The Racing Absolute incorporates Matryx® material on the lower leg for even further weight reduction and breathability Replacing the HRSF in the inner arms, crotch, back of the legs, collar and pectoral areas are Kevlar®-reinforced stretch panels, providing high elasticity for freedom of movement, and increased protection. The Racing Absolute V2’s construction has schoeller®-keprotec seam reinforcements at the elbows and knees, GP DFS external sliders on the shoulders, knees, and elbows, all-new race-grade GP-R PRO CE Level 2 forearm and knee armor, and Nucleon Race shoulder armor – all adding up to and setting a new Alpinestars Professional Racing standard. To provide complete upper body and hip protection, the Racing Absolute v2 offers direct internal integration of the optional Tech-Air® 10 Airbag System within the suit’s detachable Polygeine treated inner comfort liner for the ultimate in rider protection. 3. The Racing Absolute v2 is Alpinestars’ top-of-theline MotoGP level suit. · Tech-Air® Ready with left arm slot for Tech-Air® 10 LED display. · Localized perforation on full front panels. · GP Aero Back Hump. · GP replaceable knee sliders. · According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: · CE Category II PPE Regulation (EU) 2016/425 – AAA class. · CE Level 2 EN1621-2:2014 Alpinestars Nucleon back protector. · CE Level 1 EN1621-1:2012 Alpinestars GP-R shoulder and elbow protectors. · Kevlar® is a trademark or registered trademark of affiliates of DuPont de Nemours, Inc. used under license by Alpinestars S.p.A. size: 48 - 58 $ 3799.95 METALLIC BLUE BLACK WHITE RED FLUO 2801-1572 2801-1573 2801-1574 2801-1575 2801-1576 2801-1577 BLACK WHITE RED FLUO 2801-1566 2801-1567 2801-1568 2801-1569 2801-1570 2801-1571 SIZE 48 50 52 54 56 58 Racing Absolute v2 leather suit 4
Alpinestars new technical professional spec 1pc racing leather suit, the GP Tech v4 Leather Suit uses feedback from Alpinestars rostrum of athletes to deliver race-grade technology in a suit optimized for performance, protection and comfort. Tech-Air® 10 ready, this suit offers superior freedom of movement and high level of ventilation through the development of innovative new materials: MATRYX® ultra abrasion resistant and highly breathable zones, Cool-iR Tech treatment for the prevention of heat build-up, and Kevlar® net bonding reinforcement for prevention of heat transfer. Advanced material construction; MATRYX® structural panels on the thigh, abdomen, chest and back hump provide parametric performance for ventilation and superior mechanical resistance to tearing and abrasion while also being extremely thin and lightweight, with Kevlar® reinforcement for prevention of heat transfer. 1. MATRYX® lower leg covered with high performance PU; directly derived from MotoGP, this innovative lower leg construction delivers lighter weight, enhanced ventilation and superior freedom of movement. 2. An engineered fit designed to deliver the highest level of active race protection, this suit is TechAir® ready and can accommodate the Tech-Air® 10 Airbag System with its extended hip protection. 3. The GP Tech v4 is equipped with a slot of the left forearm to accommodate the Tech-Air® 10 Airbag System’s wireless LED display. 4. Engineered Cool-iR Tech treatment for optimized body temperature control; this innovative racing treatment, embedded in the leather, is a technology that reflects the Infrared from the sun’s rays to prevent heat build-up, thus effectively regulating the temperature inside. Race fit – highly pre-curved body, arms and knees for enhanced performance. Kangaroo leather, mainly in the high flex zone like arms and hips and abdomen, and race grade bovine leather construction for the optimum blend of weight saving, high performance and comfort. Extended Kevlar® stretch paneling around chest, inner arms crotch and back leg for enhanced comfort and strength. GP DFS armor delivers optimal resistance against impacts and abrasion and offers exceptional friction control. Replaceable elbow sliders. Internal Race spec GP-R Lite armor is soft for comfort and delivers extended coverage for additional protection in key zones. Bio-Flex Race hip armor for optimal resistance against impacts. Strategic perforations on arms and legs for optimized airflow. New zippered detachable short leg comfort liner for convenience with Polygiene® treatment for long-lasting freshness. Internal paddock’s waist hook system to keep the suit in place when off the bike, moving around in the paddock or the pit garage with top of the suit out of the shoulders. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II EN17092 standards – AAA class. Kevlar® is a trademark or registered trademark of affiliates of DuPont de Nemours, Inc. used under license by Alpinestars s.p.a. GP Tech v4 leather suit size: 48 - 58 $ 1999.95 BLACK BLUE YELLOW FLUO 2801-1521 2801-1522 2801-1523 2801-1524 2801-1525 2801-1526 BLACK RED FLUO YELLOW FLUO 2801-1527 2801-1528 2801-1529 2801-1530 2801-1531 2801-1532 BLACK WHITE 2801-1515 2801-1516 2801-1517 2801-1518 2801-1519 2801-1520 SIZE 48 50 52 54 56 58 5
Alpinestars new technical reference 1pc racing leather suit, the Fusion Leather Suit is Tech-Air® ready and offers superior freedom of movement and high level of ventilation through the development of innovative new materials: RIDEKNIT® stretch paneling and MATRYX® ultra abrasion resistant and highly breathable zones. 1. Engineered RIDEKNIT® stretch paneling for enhanced flexibility and freedom of movement with extensive perforations at the crotch, rear of the leg, abdomen, chest, neck, arm holes, inner arms and shoulder blades, and strategically positioned dual layers in keys areas for additional protection against abrasion. 2. Innovative MATRYX® structural panels on the thigh, abdomen, chest and back hump provide parametric performance for ventilation and superior mechanical resistance to tearing and abrasion while also being extremely thin and lightweight. 3. An engineered fit designed to deliver the highest level of active race protection, this suit is TechAir® ready and can accommodate the Tech-Air® 5 Airbag System, complete with new race algorithm which is available as a download. Race fit – highly pre-curved body, arms and knees for enhanced performance. Premium bovine ‘racing grade’ leather with dual layers in seat area for superior abrasion resistance. DFS armor delivers optimal resistance against impacts and abrasion, and offers exceptional friction control. Internal Race spec GP-R armor is soft for comfort and delivers extended coverage for additional protection in key zones. Bio-Flex Race hip armor for optimal resistance against impacts. Chest compartments can accommodate the Nucleon chest inserts (available as an accessory upgrade). Snap connection system allows integration of the CE-certified Nucleon Race back protector. Calf RIDEKNIT® stretch paneling perfectly adapts to different calf shapes and muscle movements. Knitted collar for rider comfort. Zippered detachable comfort liner with Polygiene BiostaticTM Stays Fresh Technology treatment for convenience. Reflective details. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II prEN17092 standards – AAA class. Fusion leather suit. size: 46-60 $ 1599.95 BLACK RED FLUO 2801-1508 2801-1509 2801-1510 2801-1511 2801-1512 2801-1513 2801-1514 BLACK WHITE 2801-1501 2801-1502 2801-1503 2801-1504 2801-1505 2801-1506 2801-1507 SIZE 46 48 50 52 54 56 58 6
7
The Tech-Air® Ready GP Plus v4 leather suit is a complete revolution of the existing v3 model featuring an all-new construction including a blend of Flex Plus racing bovine leather, Alpinestars Composite Stretch Plus material, Matryx®, HRSF, and GP DFS sliders perfect for the sport and track rider looking for an upper mid-level suit with the latest material innovations. The GP Plus v4 features new Flex Plus race leather, specially tanned and refined in Italy, ultraflexible Flex Plus race bovine leather that is highly adaptive to the body, supporting a 6% adaptability ratio which is 80% more than that offered by regular bovine leather. The result means that the GP Plus v4 Leather Suit provides unrivalled comfort, feel, freedom of movement and precise fitment. Additionally, the Flex Plus race leather meets Alpinestars’ Professional racing standard in terms of abrasion and tear resistance, while being 10% lighter than standard bovine leather. The GP Plus v4 also incorporates Alpinestars Composite Stretch Plus, A-CS® Plus, material on the suit’s side torso and shoulder blades, offering lower weight, and increased flexibility and freedom of movement. With A-CS® Plus, the stretchability ratio provides 20% additional elongation and tear resistance is increased by 300% versus leather. Another benefit of using A-CS® Plus is that it offers high breathability with a lower weight and lower profile than leather accordion paneling. The GP Plus v4 also incorporates strategically placed lightweight and breathable Matryx® material panels on the suit’s torso for optimal ventilation, especially when the suit is worn with Tech-Air® Airbag Systems like the Tech-Air® 10 or 5. As for other construction features, the GP Plus v4 has HRSF stretch inserts in the crotch, back of legs, inner arms, and pectoral areas. Perforation of the Flex Plus race leather is provided all over the upper chest, abdomen, and thighs. The suit also incorporates GP DFS shoulder, elbow, and knee sliders for protection. Sporting soft stretch wrist and ankle cuffs the suit also has and a detachable comfort liner with biostatic Polygiene® treatment to keep it feeling and smelling fresh. Providing the GP Plus v4’s impact protection, race-proven GP-R elbow, forearm, knee, and shin armor, and Nucleon Race shoulder armor are incorporated in the suit, resulting in a AAA CE Rating. For the ultimate in rider protection, the GP Plus v4 is also fully Tech-Air® Ready for use with the Tech-Air® 5 or Tech-Air® 10 Airbag Systems and provides a convenient pocket on the forearm for the Tech-Air® 10’s remote LED panel. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II EN17092 standards – AAA class. Kevlar® is a trademark or registered trademark of affiliates of DuPont de Nemours, Inc. used under license by Alpinestars S.p.A. size: 48 - 58 $ 1499.95 GP Plus v4 leather suit BLACK WHITE 2801-1548 2801-1549 2801-1550 2801-1551 2801-1552 2801-1553 BLACK RED FLUO DARK BLUE 2801-1560 2801-1561 2801-1562 2801-1563 2801-1564 2801-1565 SIZE 48 50 52 54 56 58 BLACK RED FLUO WHITE 2801-1554 2801-1555 2801-1556 2801-1557 2801-1558 2801-1559 8
9
Premium leather main chassis constructed from 1.3mm genuine bovine leather. Large accordion stretch panels help movement and comfort on the bike. Stretch fabric panels on sleeves, crotch, calves and chest further improve fit and feel. Ergonomic back hump, sculpted for better airflow and performance at high speed. Pre-curved sleeve and leg construction. Perforated panels highly improve ventilation. Extended printed graphic. Calf expansion gusset. Hook and loop strap adjusters for calves and cuffs. Multiple snap button system to integrate the Level 2 Alpinestars Nucleon back protector. Integrated padding for increaseds comfort. Multi-layer, reinforced knee construction. Internally reinforced seat area. Removable inner mesh liner for convenience and breathability. Inner waterproof wallet pocket. 3D textured comfort fabric for collar construction. Alpinestars GP-R protection on shoulders, elbows and knees. Alpinestars Nucleon hip protector. Dynamic Friction Shield (DFS) external dual density TPU sliders on shoulders and knee New, innovative RR elbow slider is anatomically contoured and features a removable and replaceable screw-mounted insert slider. Alpinestars Sport knee slider. Nucleon Hip Protector HR-HR. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: CE Category II PPE Regulation (EU) 2016/425 – AAA class. CE Level 2 EN1621-2:2014 Alpinestars Nucleon back protector. CE Level 1 EN1621-1:2012 Alpinestars GP-R shoulder and elbow protectors. size: 46-60 1299.95 BLACK CAMO RED FLUO 2801-1243 2801-1244 2801-1245 2801-1246 2801-1247 2801-1248 2801-1249 2801-1250 SIZE 46 48 50 52 54 56 58 60 GP Plus Camo leather suit. 10
Missile v2 Ignition leather suit. size: 46-60 $ 1199.95 The Missile Ignition v2 1pc racing leather suit delivers optimum abrasion resistance while also offering extensive ventilation thanks to its MATRYX® zones. This suit has an engineered fit to deliver the highest level of active race protection and is Tech-Air® ready; it can accommodate the Tech-Air® 10 Airbag System, complete with its extended hip protection. An engineered fit designed to deliver the highest level of active race protection, this suit is TechAir® ready and can accommodate the Tech-Air® 5 Airbag System, complete with new race algorithm which is available as a download. Innovative MATRYX® structural panels on the abdomen and back hump provide parametric performance for ventilation and superior mechanical resistance to tearing and abrasion while also being extremely thin and lightweight. 1. DFS shoulder, elbow and knew armor delivers optimal resistance against impacts and abrasion, and offers exceptional friction control 2. HRSF polyamide stretch inserts for optimal abrasion resistance while ensuring enhanced freedom of movement. 3. Dedicated ‘Ignition’ graphic for a striking racing-inspired aesthetic. · Race fit – highly pre-curved body, arms and knees for enhanced performance. · Premium bovine leather with dual layers in seat area for superior abrasion resistance. · DFS armor delivers optimal resistance against impacts and abrasion, and offers exceptional friction control · Internal Race spec GP-R armor is soft for comfort and delivers extended coverage for additional protection in key zones. · Bio-Flex Race hip armor for optimal resistance against impacts. · Snap connection system allows integration of CE-certified Nucleon Race back protector. · Chest compartments can accommodate the Nucleon chest inserts (available as an accessory upgrade). · Zippered detachable comfort liner with Polygiene BiostaticTM Stays Fresh Technology treatment for convenience. · According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II prEN17092 standards – AAA class. METAL GRAY BLACK YELLOW FLUO RED FLUO 2801-1461 2801-1462 2801-1463 2801-1464 2801-1465 2801-1466 2801-1467 2801-1468 SIZE 46 48 50 52 54 56 58 60 BLACK BLACK 2801-1533 2801-1534 2801-1535 2801-1536 2801-1537 2801-1538 2801-1539 2801-1540 BLACK WHITE RED FLUO 2801-1469 2801-1470 2801-1471 2801-1472 2801-1473 2801-1474 2801-1475 2801-1476 SIZE 46 48 50 52 54 56 58 60 BLACK RED FLUO 2801-1453 2801-1454 2801-1455 2801-1456 2801-1457 2801-1458 2801-1459 2801-1460 11
Premium leather main chassis constructed from 1.3mm genuine bovine leather. Large accordion stretch panels help movement and comfort on the bike. Stretch fabric panels on sleeves, crotch, calves and chest further improve fit and feel. Ergonomic back hump, sculpted for better airflow and performance at high speed. Pre-curved sleeve and leg construction reduces riding fatigue. Perforated panels highly improve ventilation. Printed graphic. Calf expansion gusset. Hook and loop strap adjusters for cuffs. Multiple snap button system to integrate the Level 2 Alpinestars Nucleon back protector. Integrated padding for increaseds comfort. Multi-layer, reinforced knee construction. Internally reinforced seat area. Removable inner mesh liner for convenience and breathability. Inner waterproof wallet pocket. 3D textured comfort fabric for collar construction. Alpinestars GP-R protection on shoulders, elbows and knee. Dynamic Friction Shield (DFS) external dual density TPU sliders on shoulders and knee. New, innovative RR elbow slider is anatomically contoured and features a removable and replaceable screw-mounted insert slider. Alpinestars Sport knee slider. Nucleon Hip Protector HR-HR. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: CE Category II PPE Regulation (EU) 2016/425 – AAA class. CE Level 2 EN1621-2:2014 Alpinestars Nucleon back protector. size: 46-58 $ 1199.95 BLACK RED FLUO WHITE 2801-1225 2801-1226 2801-1227 2801-1228 2801-1229 2801-1230 2801-1231 BLACK YELLOW FLUO GRAY 2801-1235 2801-1236 2801-1237 2801-1238 2801-1239 2801-1240 2801-1241 SIZE 46 48 50 52 54 56 58 GP Plus Venom leather suit 12
The Missile v2 1pc racing leather suit delivers optimum abrasion resistance while also offering the highest level of active race protection; this suit is Tech-Air® ready and can accommodate the Tech-Air® 10 Airbag System, complete with its extended hip protection. Featuring An engineered fit designed to deliver the highest level of active race protection, this suit is TechAir® ready and can accommodate the Tech-Air® 5 Airbag System, complete with new race algorithm which is available as a download. DFS shoulder, elbow and knee armor delivers optimal resistance against impacts and abrasion, and offers exceptional friction control. HRSF polyamide stretch inserts for optimal abrasion resistance while ensuring enhanced freedom of movement. Race fit – highly pre-curved body, arms and knees for enhanced performance. Premium bovine leather with dual layers in seat area for superior abrasion resistance. DFS armor delivers optimal resistance against impacts and abrasion, and offers exceptional friction control. Internal Race spec GP-R armor is soft and delivers extended coverage for additional protection in key zones. Bio-Flex Race hip armor for optimal resistance against impacts. Snap connection system allows integration of the CE-certified Nucleon Race back protector. Chest compartments can accommodate the Nucleon chest inserts (available as an accessory upgrade). Zippered detachable comfort liner with Polygiene BiostaticTM Stays Fresh Technology treatment for convenience. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II prEN17092 standards – AAA class. size: 46 - 60 $ 1199.95 BLACK WHITE 2801-1477 2801-1478 2801-1479 2801-1480 2801-1481 2801-1482 2801-1483 2801-1484 BLACK RED FLUO 2801-1485 2801-1486 2801-1487 2801-1488 2801-1489 2801-1490 2801-1491 2801-1492 SIZE 46 48 50 52 54 56 58 60 Missile V2 leather suit BLACK WHITE RED FLUO 2801-1493 2801-1494 2801-1495 2801-1496 2801-1497 2801-1498 2801-1499 2801-1500 13
The Missile v2 2pc racing leather suit delivers optimum abrasion resistance while also offering the highest level of active race protection; this suit is Tech-Air® ready and can accommodate the TechAir® 10 Airbag System, complete with its extended hip protection. 1. Featuring An engineered fit designed to deliver the highest level of active race protection, this suit is Tech-Air® ready and can accommodate the Tech-Air® 5 Airbag System, complete with new race algorithm which is available as a download. 2. DFS shoulder, elbow and knee armor delivers optimal resistance against impacts and abrasion, and offers exceptional friction control. 3. HRSF polyamide stretch inserts for optimal abrasion resistance while ensuring enhanced freedom of movement. Race fit – highly pre-curved body, arms and knees for enhanced performance. Premium bovine leather with dual layers in seat area for superior abrasion resistance. DFS armor delivers optimal resistance against impacts and abrasion, and offers exceptional friction control. Internal Race spec GP-R armor is soft and delivers extended coverage for additional protection in key zones. Bio-Flex hip armor for optimal resistance against impacts. Polygiene BiostaticTM Stays Fresh Technology treatment on mesh comfort line for convenience. Snap connection system allows integration of CE-certified Nucleon Race back protector. Back compartment can accommodate the Nucleon back inserts (available as an accessory upgrade). Chest compartments can accommodate the Nucleon chest inserts (available as an accessory upgrade). According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II prEN17092 standards – AAA class. size: 48 - 60 $ 1099.95 BLACK WHITE 2802-0504 2802-0505 2802-0506 2802-0507 2802-0508 2802-0509 2802-0510 SIZE 48 50 52 54 56 58 60 Missile v2 2pc leather suit 14
15
Tech-Air® 5 ready; Tech-Air® is the world’s first completely electronic, self-contained, full independent upper body motorcycle airbag system with no bike-to-rider set-up configurations required. Strategically positioned accordion stretch panel inserts have been designed to accommodate Alpinestars Airbag System, allowing expansion when the airbag inflates but also offering a high level of anatomical performance and a superior fit when riding without the system fitted. Bovine multi-panel construction for strength, comfort and superior abrasion resistance. GP protectors on the elbow, shoulder, knee and tibia for effective impact protection. DFS Lite protector on the shoulder for additional protection against abrasion in a key area. Chest pad compartment designed to take Alpinestars CE-certified Nucleon chest pads. Comes fitted with Alpinestars Nucleon Bio-Flex hip protectors. Inner knee suede reinforcement for grip on the bike. Perforated leather panels are strategically positioned to offer excellent levels of cooling airflow and comfort. Stretch panels on abdomen, under the arms, on the arms, crotch and back of leg for an optimum high performance riding fit. Aerodynamic back hump is ventilated for maximum airflow. Removable and replaceable Sport slider offers superior durability and feel Calf expansion panel with stretch ribs for a custom fit. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II prEN17092 standards – AA class. size: 48 - 60 size: 48 - 64 col. black red fluo $ 999.95 BLACK WHITE RED FLUO YELLOW FLUO 2801-1446 2801-1447 2801-1448 2801-1449 2801-1450 2801-1451 2801-1452 - - BLACK RED FLUO 2801-1437 2801-1438 2801-1439 2801-1440 2801-1441 2801-1442 2801-1443 2801-1444 2801-1445 SIZE 48 50 52 54 56 58 60 62 64 GP Force Chaser leather suit BLACK WHITE RED - - 2801-1541 2801-1542 2801-1543 2801-1544 2801-1545 2801-1546 2801-1547 16
Premium leather main chassis constructed from 1.3mm genuine bovine leather for high levels of abrasion resistance. Large accordion stretch panels help movement and comfort on the bike. Stretch fabric panels on sleeves, crotch and chest further improve fit and feel. Ergonomic back hump is sculpted for better airflow and performance at high speed. Pre-curved sleeve and leg construction for reduced rider fatigue while riding. Localized perforations highly improve ventilation. Chest and back compartments can accommodate the Nucleon chest and back inserts (available as an accessory upgrade). Integrated padding for enhanced levels of rider comfort. Multi-layered reinforced knee construction for superior impact protection in a key area. Removable mesh inner liner for convenience and breathability. 3D textured fabric collar construction for high levels of rider comfort. Alpinestars GP-R protectors on the shoulder, elbow, knee for superior impact protection. DFS external dual density TPU sliders on the shoulder for additional rider comfort. Sport knee slider. size: 130 / 140 / 150 $ 699.95 BLACK WHITE RED FLUO YELLOW FLUO 2801-1221 2801-1222 2801-1223 SIZE 130 140 150 Youth GP Plus leather suit BLACK WHITE RED FLUO 2801-1218 2801-1219 2801-1220 17
Tech-Air® 5 ready; Tech-Air® is the world’s first completely electronic, self-contained, full independent upper body motorcycle airbag system with no bike-to-rider setup configurations required. Knitted design leather jacket designed with a body mapped race fit and pre-curved sleeves and body for optimal riding performance. Advanced inner comfort liner construction and assembly for optimized flexibility and ease of use, thereby maximizing the knit panels function for an unrivalled sensation of freedom when the jacket is on. Engineered stretch panel inserts have been designed to accommodate Alpinestars Airbag System, allowing expansion when the airbag inflates but also offering a high level of anatomical performance and a superior fit when riding without the system fitted. Chassis constructed from premium bovine leather for superior abrasion resistance. Large mesh panel on back of collar for optimized levels of airflow. Level 1 Nucleon Flex Plus armor on shoulder and elbow (Nucleon chest Level 1 and Nucleon Level 1 and 2 back protectors available as an accessory upgrade). DFS Lite on shoulders for enhanced impact protection and abrasion resistance. Rear of the jacket is elongated for enhanced coverage when riding. Knitted technology fabric on seam area for programmed stretchability, thus optimizing fit and comfort. Hook and loop waist and cuff with semi-automatic zip for a secure closure. Low profile collar construction with soft lining for enhanced rider comfort. Two front zippered pockets, inner waterproof document pocket and two inner pockets on the liner for safe and secure storage. Upper side vents for optimal airflow. Coil main zipper for ease of use, even with gloved hands. Waist connection zipper allows attachment to Alpinestars riding pants. Reflective details. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: Fully CE-certified riding garment to CE – Category II prEN17092 standards – AA class CE Level 1 EN1621-1:2012 Alpinestars Nucleon Flex Plus shoulder and elbow protectors. size: 48-64 $ 629.95 BLACK WHITE RED 2810-3838 2810-3839 2810-3840 2810-3841 2810-3842 2810-3843 2810-3844 2810-3845 2810-3846 SIZE 48 50 52 54 56 58 60 62 64 GP Plus R v3 Rideknit leather jacket BLACK BLACK 2810-3820 2810-3821 2810-3822 2810-3823 2810-3824 2810-3825 2810-3826 2810-3827 2810-3828 BLACK RED FLUO 2810-3829 2810-3830 2810-3831 2810-3832 2810-3833 2810-3834 2810-3835 2810-3836 2810-3837 BLACK WHITE 2810-4002 2810-4003 2810-4004 2810-4005 2810-4006 2810-4007 2810-4008 2810-4009 2810-4010 BLACK YELLOW FLUO 2810-4011 2810-4012 2810-4013 2810-4014 2810-4015 2810-4016 2810-4017 2810-4018 2810-4019 18
Missile v2 Ignition leather jacket size: 48-60 $ 699.95 The Missile Ignition v2 Leather Jacket delivers optimum abrasion resistance while also offering extensive ventilation thanks to its MATRYX® zones. This jacket has an engineered fit to deliver the highest level of active race protection; this jacket is Tech-Air® ready and can accommodate the new Tech-Air® 5 Airbag System. Featuring an engineered fit designed to deliver the highest level of active race protection, this jacket is TechAir® ready and can accommodate the Tech-Air® 5 Airbag System, complete with new race algorithm which is available as a download. 1. Innovative MATRYX® structural panels on the abdomen and back hump provide parametric performance for ventilation and superior mechanical resistance to tearing and abrasion while also being extremely thin and lightweight. 2. Protective and comfortable Nucleon Flex Pro armor is highly flexible and breathable, and has a thin profile for optimum rider comfort. 3. DFS armor delivers optimal resistance against impacts and abrasion, and offers exceptional friction control 4. HRSF stretch inserts for optimal abrasion resistance while ensuring enhanced freedom of movement. 5. Dedicated ‘Ignition’ graphic for a striking racing-inspired aesthetic. · Sport fit – highly pre-curved body and arms for enhanced performance. · Premium bovine leather for superior abrasion resistance. · Chest compartments can accommodate the Nucleon chest inserts (available as an accessory upgrade). · Back compartment can accommodate the Nucleon back inserts (available as an accessory upgrade). · Snap connection system allows integration of the CE-certified Nucleon Race Back protector. · According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II prEN17092 standards – AAA class. BLACK 2810-3861 2810-3862 2810-3863 2810-3864 2810-3865 2810-3866 2810-3867 SIZE 48 50 52 54 56 58 60 BLACK RED 2810-3868 2810-3869 2810-3870 2810-3871 2810-3872 2810-3873 2810-3874 BLACK WHITE 2810-3927 2810-3928 2810-3929 2810-3930 2810-3931 2810-3932 2810-3933 19
Premium leather main chassis constructed from 1.3mm genuine bovine leather with High Resistant Stretch Fabric (HRSF) strategically positioned for comfort. Alpinestars Nucleon Flex Plus armor on shoulder and elbow (Alpinestars Nucleon back protector and Nucleon KR-Ci chest protector available as an accessory upgrade). Accordion panel on back and shoulder with HRSF polyamide stretch material on sleeve for an optimized fit and performance. Waist adjustment for the highest level of comfort. Zip on front and leather collar tab closure for a secure closure. Low profile collar with soft edging and 3D mesh inner comfort fabric for enhanced rider comfort. Two zippered hand pockets, two inner pockets and an inner waterproof document pocket for safe and secure storage. Localized perforations for improved ventilation. Reflective insert. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: CE Category II PPE Regulation (EU) 2016/425 – AA class. CE Level 2 EN1621-2:2014 Alpinestars Nucleon back protector, available as an accessory upgrade. CE Level 1 EN1621-1:2012 Alpinestars Nucleon Flex Plus shoulder and elbow protectors. size: 48-60 size: 48-64 black black $ 579.95 BLACK BLACK 2810-3686 2810-3687 2810-3688 2810-3689 2810-3690 2810-3691 2810-3692 2810-3693 2810-3694 SIZE 48 50 52 54 56 58 60 62 64 GP Plus R v3 Airflow leather jacket BLACK DARK GRAY WHITE 2810-3695 2810-3696 2810-3697 2810-3698 2810-3699 2810-3700 2810-3701 - - BLACK RED WHITE 2810-3702 2810-3703 2810-3704 2810-3705 2810-3706 2810-3707 2810-3708 - - 20
Premium leather main chassis constructed from buffalo oil timber leather. Nylon reinforced stretch fabric with spandex for rider comfort. Alpinestars Nucleon Flex Plus armor on shoulders and elbow (Alpinestars Nucleon back protector and Nucleon KR-Ci chest protector available as an accessory upgrade). 600 Denier polyfabric reinforcement on shoulder and elbows for additional abrasion and tear resistance. Waist volume adjustment for the highest level of comfort. YKK zip on front and zippered wrists for a secure closure. Short collar with a punched leather layer for enhanced rider comfort. Two zippered pockets and two elasticated inner liner pockets for safe and secure storage. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: CE Category II PPE Regulation (EU) 2016/425 – A class. CE Level 2 EN1621-2:2014 Alpinestars Nucleon back protector, available as an accessory upgrade. CE Level 1 EN1621-1:2012 Alpinestars Nucleon Flex Plus shoulder and elbow protectors. size: 48-60 size: 48-64 black black $ 579.95 BLACK RED WHITE 2810-3725 2810-3726 2810-3727 2810-3728 2810-3729 2810-3730 2810-3731 - - SIZE 48 50 52 54 56 58 60 62 64 GP Plus R v3 leather jacket BLACK BLACK 2810-3709 2810-3710 2810-3711 2810-3712 2810-3713 2810-3714 2810-3715 2810-3716 2810-3717 BLACK DARK GRAY WHITE 2810-3718 2810-3719 2810-3720 2810-3721 2810-3722 2810-3723 2810-3724 - - 21
22
Stylish and classic leather jacket features square quilting for an authentic heritage look. Tone-on-tone stripes accentuates the jacket’s craftsmanship while highlighting the modern ergonomic engineering of the sleeve. Rear bellow on the back for greater levels of comfort. Soft leather main shell with a ‘used’ finish. Accordion leather waist inserts provide a close yet comfortable fit. Pre-curved sleeve construction for comfort and movement in the riding position. Zipper and snap sleeve cuff closure and adjustment for a personalized and secure fit. Ergonomic collar with padded details in specific zones to guarantee comfort and personalized fit. High Resistant Stretch Fiber (HRSF) inserts on the arm to aid movement during riding. Two zippered hand pockets for secure storage of items. Unique leather zipper puller for easier opening and closure. Lower back extended for riding comfort and greater protection against the elements. All interior craftsmanship details use a perforated soft leather. Removable flannel liner is thermal insulated offering versatile weather protection in colder climates. Chest protector compartment can be upgraded with Alpinestars Nucleon chest protector insert. Back protector compartment can be upgraded with Alpinestars Nucleon back protector insert. Interior waterproof wallet/ document compartment pocket and two large pockets on the lining for multi-purpose use. Loop waist connection allows attachment to Alpinestars Pro Denim pants. Bio-Lite shoulder and elbow protectors offer high levels of impact protection. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: CE Category II PPE Regulation (EU) 2016/425 – A class. CE Level 1 EN1621-1:2012 Alpinestars Bio-Lite shoulder and elbow protectors. size: 48-60 $ 499.95 BLACK 2810-3610 2810-3611 2810-3612 2810-3613 2810-3614 2810-3615 2810-3616 SIZE 48 50 52 54 56 58 60 Hoxton v2 leather jacket BROWN 2810-3617 2810-3618 2810-3619 2810-3620 2810-3621 2810-3622 2810-3623 23
Premium leather main chassis constructed from 1.0 – 1.2mm bovine leather. Strategically positioned stretch panels on sleeves and chest further improve fit and feel. Accordion leather stretch inserts on waist, elbow and rear shoulder afford high levels of movement. Two zippered hand pockets plus inner waterproof wallet pocket for practicality. Embossed logos and direct print graphic details. Zippered air intake vents are strategically positioned for optimized airflow when opened. Localized perforations for excellent ventilation and internal airflow. Low profile collar construction with microfiber comfort edging plus 3D textured fabric inner collar lining for rider comfort. Pre-curved sleeve construction reduces fatigue. Hook and loop grip cuff adjuster. Reflective details. Mesh lining for breathability. Removable thermal liner for versatility. Inner waterproof wallet pocket for peace-of-mind storage. Chest pad and back compartments can accommodate the Nucleon chest and back inserts (available as an accessory upgrade). Multiple snap button system to integrate the Level 2 Alpinestars Nucleon back protector. Waist connection zipper allows attachment to Alpinestars riding pants. Level 1 GP-R shoulder and elbow protectors. External Dynamic Friction Shields (DFS) shoulder slider for high levels of abrasion resistance. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: CE Category II PPE Regulation (EU) 2016/425 – AAA class. CE Level 2 EN1621-2:2014 Alpinestars Nucleon back protector. CE Level 1 EN1621-1:2012 Alpinestars GP-R shoulder and elbow protectors. size: 48-60 $ 609.95 BROWN 2810-3575 2810-3576 2810-3577 2810-3578 2810-3579 2810-3580 2810-3581 SIZE 48 50 52 54 56 58 60 Caliber leather jacket 24
Faster v2 leather jacket size: 48-60 $ 479.95 Highly durable and technical 1.3mm leather, multi-panel construction. Nucleon Flex Plus ultra-flexible and ventilated shoulder and elbow protectors for protection against impacts. New shoulder protection features over-molded advanced TPU guard layered under the outer fabric. Snap-button system to integrate the Level 2 Alpinestars Nucleon back protector. Extensive, advanced poly fabric stretch inserts on chest, underarm and rear shoulder. Zipper wrist closure for secure and customized fit. Ventilation inlets on shoulders for high levels of airflow and are zippered for ease of use. Rear of the jacket is elongated for enhanced coverage when riding. Strategically positioned localized perforations highly improve ventilation. Hook and loop waist adjustment for an optimized fit. Stretch collar construction with 3D mesh inner collar for enhanced rider comfort. Mesh liner construction for improved breathability, comfort and ventilation. External, large-opening front hand pockets are zippered for peace-of-mind closure. Zippered front pocket for secure storage of items. Waist connection zipper allows attachment to Alpinestars riding pants. Reflective detail. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: . CE Category II PPE Regulation EN 17092 – AA class. CE Level 2 EN1621-2:2014 Alpinestars Nucleon back protector, available as an accessory upgrade. CE Level 1 EN1621-1:2012 Alpinestars Nucleon Flex Plus shoulder and elbow protectors. BLACK WHITE 2810-3797 2810-3798 2810-3799 2810-3800 2810-3801 2810-3802 2810-3803 SIZE 48 50 52 54 56 58 60 BLACK RED 2810-3790 2810-3791 2810-3792 2810-3793 2810-3794 2810-3795 2810-3796 BLACK BLACK 2810-3781 2810-3782 2810-3783 2810-3784 2810-3785 2810-3786 2810-3787 25
Main chassis constructed from 1.3mm premium bovine leather. Accordion leather stretch zones above the knee offer improved flexibility. Extended high rear waist construction provides greater overlap with the riding jacket. Large stretch panels on calf area for improved fit and feel. Pre-curved leg construction helps prevent riding fatigue and aids performance fit. Waist circumference adjustment allows riders to tailor the fit. Waist connection zipper allows attachment to Alpinestars riding jackets. Internal mesh lining with stretch panel inserts work in conjunction with outer stretch zones for freedom of movement. Internally reinforced seat and knee area for additional protection. Nucleon hip protector Alpinestars GP-R protection on knee for impact protection. Replaceable Sport knee sliders. Dynamic Friction Shield (DFS) offers excellent impact and abrasion resistance. External dual density TPU knee sliders are removable and replaceable. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply to this product: CE Category II PPE Regulation (EU) 2016/425 – AAA class. CE Level 1 EN1621-1:2012 Alpinestars GP-R knee protectors. size: 44-60 $ 639.95 BLACK 2811-0595 2811-0596 2811-0597 2811-0598 2811-0599 2811-0600 2811-0601 2811-0602 2811-0603 SIZE 44 46 48 50 52 54 56 58 60 Track v2 leather pants 26
The Missile v3 Leather Pants Airflow feature a newly evolved, precise ‘flex fit’ design, with the pre-curved legs, and flex zones on the knee and waist delivering a close riding fit with plenty of stretch for optimal rider movement. Featuring a premium leather chassis for enhanced abrasion resistance and ergonomic stretch panels for comfort, these pants are also equipped with extensive perforations for maximum airflow. These pants are Tech-Air® ready and can accommodate the TechAir® 10 Airbag System, complete with its extended hip protection. 1. Featuring an engineered fit designed to deliver the highest level of active race protection, these pants are Tech-Air® ready and can accommodate the Tech-Air®10 Airbag System with its extended hip protection. 2. Perforated leather panel for optimal airflow 3. Comfort fit; design follows the contours of the knee for the optimal blend of comfort and freedom of movement. 4. ‘High Flex’ design for an optimized fit and enhanced freedom of movement. Premium leather main chassis constructed from 1.3mm genuine bovine leather. Dual layers in exposed areas for additional abrasion resistance. Accordion leather stretch zones above the knee offer improved flexibility. Extended high rear waist construction provides greater overlap with the riding jacket. Extensive stretch panels on calf and crotch area for improved fit and feel. Pre-curved leg construction helps improve fit and reduce riding fatigue. Strategically positioned perforated leather panel on thigh for internal air cooling. Waist connection zipper allows attachment to Alpinestars riding jackets Hook and loop waist adjuster for secure and personalized fit. Internal mesh lining with stretch panel inserts work in conjunction with outer stretch zones for freedom of movement. Alpinestars GP-R Lite internal protection on knee. Replaceable Sport knee sliders for excellent impact and abrasion resistance. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II EN17092 standards – AA class. size: 44-60 $ 499.95 BLACK BLACK 2811-0645 2811-0646 2811-0647 2811-0648 2811-0649 2811-0650 2811-0651 2811-0652 2811-0653 SIZE 44 46 48 50 52 54 56 58 60 Missile v3 Airflow leather pants 27
28
ADVENTURE TOURING 29
AMT-10R Drystar® XF® jacket size: s - 4xl $ 899.95 FUR GRAY PALE BROWN SPICY ORANGE 2820-6063 2820-6064 2820-6065 2820-6066 2820-6067 2820-6068 2820-6069 SIZE S M L XL 2XL 3XL 4XL The modular, multi-season AMT-10R Jacket has been engineered to deliver premium protection, unrivalled usability and adapt to extreme weather conditions. The R version of the AMT 10 provides additional off-road adventure capabilities incorporating reinforcements and extra storage space, perfect for the die-hard adventure riders that want to get out and explore. A new approach in advanced riding, all-weather protective apparel, the innovative AMT-10R Jacket has a modular construction. Incorporating the most advanced materials technologies including SuperFabric®, Drystar®XF, MATRYX®, Rideknit® and leather bonded Kevlar® Flynet, the jacket offers premium protective performance, climate management, versatility, and comfort. The external SuperFabric® reinforcements provide enhanced durability and upgraded ergonomics. Equipped with Alpinestars’ new laminated 2.5 Layer DrystarXF® waterproof and highly breathable membrane, the multi-season AMT-10R Drystar®XF Jacket has been engineered for effective all-weather performance and superior comfort in all weather conditions, wet or dry. The jacket can be 100% waterproof with adjustable direct ventilation or easily converted to a full airflow jacket while still maintaining the highest level of protective performance. Featuring an engineered fit designed to deliver the highest level of active upper body protection, the AMT-10R Jacket is Tech-Air® Ready. The modular Laminated Drystar®XF (extra flow) membrane provides superior breathability and overall water vapor management. The jacket membrane incorporates hydrophilic technology to provide 100% waterproof performance and is easily packable and fast drying. The key features of Drystar®XF are that it is 100% waterproof, very breathable in wet and dry conditions, lightweight and comfortable. In warm weather conditions the jacket can be quickly converted to a summer or airflow jacket by completely removing the laminated Drystar®XF rain panel, which can be conveniently stored in the large stretch mesh pocket on the back when not in use. The fully converted airflow jacket maintains all the protective performance, thanks to the lightweight MATRYX® panels that delivers exceptional abrasion resistance, tear strength and breathability. A SuperFabric® application on top of the outer shell, resembling a layer of tiny hard armor plates, provides a significant increase in the level of overall performance when it comes to abrasion, cut, and slash resistance, as well as durability, while at the same time keeping the base fabric highly flexible and breathable. Another added benefit of the SuperFabric® is the reduced risk of tumbling for the rider as the SuperFabric® creates a low friction area. The AMT-10R incorporates new rugged leather bonded with Kevlar® Flynet leather panels deliver increased tear resistance levels of +80% and improved cut resistance of +25%. Soft leather reinforced with DuPont™ engineered Flynet technology with Kevlar®grid for high abrasion resistance on exposed areas. The use of Rideknit® material in the AMT-10R jacket allows us to provide important performance properties specifically tailored to motorcycling demands, including premium comfort, breathability, flexibility, as well as tear and abrasion resistance, and durability. An important advantage to using Rideknit® is the ability to custom design strategic areas of Rideknit® in the jacket, based on riders’ needs, thus providing flexibility, stretch, and a high level of abrasion and tear resistance where needed. High flex Rideknit® vented panels for comfort and stretch zones for an optimized fit. In the fully waterproof configuration, the AMT-10R jacket features direct ventilation on the chest that riders can easily modify for extra ventilation via the versatile ventilation openings on the chest. The mid torso zips provide moderate ventilation and can also be opened for additional airflow. 450D laminated hard shell construction for enhanced durability. Intuitive and functional incorporation of magnetic zippers, fetlock connectors and ergonomic designs on liner connection, closure systems, wrists, and collar for ease of use. Ergonomically designed double waterproof cargo pockets for quick and easy access providing extra storage options for long-distance travelling. Molle Pouch Attachment Ladder System (PALS) to securely attach additional pockets and accessories to the jacket for real-world adventure rider, practicality. Nucleon Flex Pro CE Level 2 shoulder and elbow armor for effective protection against impacts. Optional AMT technical mid layer to add extra warmth to the jacket, perfect for winter riding. Water bladder compatibility for enhanced versatility in extreme conditions. The AMT-10R jacket incorporates and adjustable waist belt, a pant connection zipper, 2 internal pockets for storage and both back and chest protection insert pockets. Lower hem shock cord for an optimized fit. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CEcertified riding garment to CE – Category II EN17092 standards – AA Class. Kevlar® is a trademark of affiliates of DuPont de Nemours, Inc. used under license by Alpinestars S.p.A. 30
AMT-10R Drystar®XF Pants that have been engineered to deliver optimal protection, weather performance and comfort in extreme adventure riding conditions. These pants are known for their durability. The AMT-10R’s are the best choice for those who are into rugged adventure and off-road exploration, especially with their new rugged leather with Kevlar® Flynet and high strength Matryx® vented structural panels. A new approach in advanced riding all-weather protective apparel, these pants utilize a modular construction and the most advanced materials technologies. Equipped with Alpinestars laminated 2L Drystar®XF waterproof and highly breathable membrane, the pants offer effective 100% waterproof all-weather performance, the pants adapt to any type of riding and all-weather conditions, from short to long distances, and to warm, or wet weather conditions. The AMT-10R pants feature large adjustable direct opening ventilation panels on the thighs that can be rolled up and positioned into the knee, converting the pants into a partial airflow pant. The vented pants still maintain the highest level of protective performance thanks to the lightweight MATRYX® material that delivers exceptional abrasion resistance, tear strength and breathability. The AMT-10R’s utilize a modern material mix for maximum performance and offer versatility by allowing touring riders to wear the boot both in and outside of the pants. MATYRX® panel for enhanced airflow and mechanical performance. Soft leather reinforced with DuPont™ engineered Flynet technology with Kevlar®grid for high abrasion resistance on exposed areas. RIDEKNIT® comfort zone strategically positioned behind the knees for enhanced comfort, flexibility and stretch, and a high level of abrasion and tear resistance. Modular laminated Drystar®XF membrane provides superior breathability. The membrane incorporates hydrophilic technology allowing water vapor absorbed from the body to be desorbed on the outside, providing 100% waterproof performance, and is easily packable and fast drying. SuperFabric® reinforcements in exposed areas and 450 D laminated hard shell construction for enhanced durability. Elasticated back waist accordion incorporating waist volume adjusters for an optimized fit. Ergonomically designed Waterproof pocket and zippered front pockets for ease of use and extra storage options for long-distance travelling. Lower leg stretch accordion construction for the best fit and optimized comfort, regardless of the type of boot or shoe the rider is wearing. Level 2 Nucleon Flex Pro knee armor and Bio-Flex hip armor for effective impact protection. Designed with a tailored, ergonomic fit to accommodate all riding movements. Reflective detailing on the lower leg. According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: Fully CE-certified riding garment to CE – Category II EN17092 standards – AA Class. Kevlar® is a trademark of affiliates of DuPont de Nemours, Inc. used under license by Alpinestars S.p.A. AMT-10R Drystar® XF® pants size: s -4xl $ 499.95 PALE BROWN 2821-1425 2821-1426 2821-1427 2821-1428 2821-1429 2821-1430 2821-1431 SIZE S M L XL 2XL 3XL 4XL 31
RkJQdWJsaXNoZXIy OTcxOTk3