BOLD MAGENTA part numbers are new for 2022 SERVICE & MAINTENANCE TOOLS DRAGSPECIALTIES.COM TIRE & SERVICE UPDATE | 2022 TIRE & SERVICE 323 PART # SUG. RETAIL 3807-0606 $164.95 OPTIMATE™ 7 • Fully automatic nine-step 12V lead-acid battery saving charger, tester and maintainer • Delivers up to 10A charge current, ideal for V-Twin and larger UTV batteries • Ampmatic™ technology lowers charge rate for smaller batteries • Multi-step program saves batteries with as low as 0.5V and then efficiently charges and balances battery cells • Regulates charge voltage based on ambient temperature – fully charges battery even when cold and avoids overcharging when hot PART # SUG. RETAIL 3807-0596 $129.95 OPTIMATE™ 6 • OptiMate 6 with up to 6A charging power is the ideal all-in-one tool to care for all 12V lead-acid batteries • Will diagnose, recover, charge, test and maintain your batteries automatically • The Ampmatic™ microprocessor actively adjusts charge current to match battery characteristics to achieve a complete charge in the shortest possible time • Features a short circuit/dead cell check that detects internal damage in a battery and prevents unnecessary charging of a battery that cannot be recovered • Weatherproof, sealed enclosure • Recommended for STD (with removable filler caps), sealed AGM (absorbed glass mat) and sealed gel 12V lead-acid batteries from 8Ah to 120Ah • Will safely maintain the battery at 100%, never overcharging, thanks to its unique 30-minute charge/30-minute rest cycle during every hour of long-term maintenance charge • Includes permanent ringlet connector with weatherproof cap and a set of battery clips • Fully automatic operation that includes all safety features, such as reverse polarity protection and no-spark connection PART # SUG. RETAIL 3807-0597 $134.95 OPTIMATE™ LITHIUM • Fully automatic 12.8V/13.2V lithium battery saver, charger, tester and maintainer • Will protect your investment and keep your Lithium Iron Phosphate (LiFePO4/LFP) battery performing as advertised for a very long time • With up to 6A of charge current available, OptiMate Lithium’s unique multi-step Ampmatic™ program recharges and balances cells within the battery quickly and efficiently • Push-button reset for Battery Management System (BMS) on smart Lithium batteries • Maintenance program delivers current to the vehicle circuitry, protecting and keeping the battery at 100% charge • Tests and displays battery condition before charging • Voltage retention test is conducted for 30 minutes, during which no charge current is delivered, and provides results indicating the battery’s general state of health • The 12-hour maintenance charge cycle consists of 30-minute float charge periods at a voltage of 13.6V followed by and alternating with a 30-minute “rest” (no charge current) periods • During the float charge period, current is delivered only if the battery has lost charge due to connected vehicle circuitry; a refresh cycle may be performed if the charge level has dropped significantly • Charge progress is tracked against the ideal LiFePO4 charge curve, internal damage will be detected and unnecessary charging of a battery that cannot be recovered is prevented • Includes permanent ringlet connector with weatherproof cap and a set of battery clips
RkJQdWJsaXNoZXIy OTcxOTk3