2020 Parts Unlimited Watercraft

ELECTRICAL www.partsnetweb.com 2020 PARTS UNLIMITED WATERCRAFT BOLD MAGENTA part numbers are new for 2020 173 PART # SUG. RETAIL 3807‑0403 $39.95 BATTERY TENDER ® JUNIOR SELECTABLE CHARGER • Lightweight, compact, fully automatic and easy-to-use, especially in small spaces • Selectable battery chemistry – has battery chemistry selection with proper charge algorithm for lead-acid, flooded or sealed maintenance free (AGM and gel cell) and lithium batteries • Complete four-step charging program (initialization, bulk charge, absorption mode and float mode) • Automatically switches to float/​maintenance voltage after fully charging the battery • If the battery voltage drops too far under load, full charger output power resumes • 12V @ 800mA output and 120VAC @ 50/​60Hz input • Solid state, two-color LED indicates stage of charger • Spark-proof and reverse polarity protected • 12’ output cord PART # SUG. RETAIL 3807‑0401 $79.95 BATTERY TENDER ® 4 AMP SELECTABLE CHARGER • Equipped with proper charge algorithm for charge and maintenance of 6V, 12V, AGM, lead acid or lithium batteries to ensure long-term battery health • Selectable battery chemistry – has battery chemistry selection with proper charge algorithm for lead-acid, flooded or sealed maintenance free (AGM and gel cell) and lithium batteries • Complete four-step charging program (initialization, bulk charge, absorption mode and float mode) • Automatically switches to float/​maintenance voltage after fully charging the battery • If the battery voltage drops too far under load, full charger output power resumes • 12V @ 4A output and 120VAC @ 50/​60Hz input • Solid state, two-color LED indicates stage of charger • Spark-proof and reverse polarity protected • 12’ output cord PART # SUG. RETAIL 3807‑0402 $59.95 BATTERY TENDER ® 1.25 AMP SELECTABLE CHARGER • Fully-automatic battery charger with a 6V or a 12V selectable option, this charger has the proper charge algorithm to ensure long-term battery health • Complete four-step charging program (initialization, bulk charge, absorption mode and float mode) • Automatically switches to float/​maintenance voltage after fully charging the battery • If the battery voltage drops too far under load, full charger output power resumes • 6V/​12V @ 1.25A output and 120VAC @ 50/​60Hz input • Solid state, two-color LED indicates stage of charger • Spark-proof and reverse polarity protected • 12’ output cord PART # SUG. RETAIL 022‑0150‑DL‑WH $54.95 BATTERY TENDER ® WATERPROOF 800 • 12V/​800mA charger is 100% waterproof, lightweight and compact • Three-step constant current charge program with SuperSmart ™ technology • Spark-proof • Short circuit and reverse polarity protected • Weighs just 2 lb. • Optional Battery Tender ® storage pouches for safe and easy storage or transportation are available separately; see page 175 DESCRIPTION PART # SUG. RETAIL 12V/1.25A 0210128 1 $59.95 1 Not for sale in California or Oregon. BATTERY TENDER ® PLUS • Constantly monitors the battery without the damaging effects of trickle chargers; a trickle charger will eventually boil dry or overcharge a battery • Battery Tender ® Plus’ voltage output compensates for temperature changes, providing additional protection • Initial charge brings battery to full charge at approximately 14.6V • After full charge is reached, converts to float charger and monitors battery at 13.2V • Although a constant charge is being applied to the battery, there is little or no current (approx. 10mA) • Periodic maintenance is recommended, but Battery Tender can monitor a battery for years without the fear of boiling or destroying the battery • 12V Battery Tender Plus has fused quick-disconnect rings with a weather cover • Optional Battery Tender storage pouch for safe and easy storage or transportation is available separately; see page 175 for PART #500-0017X NOTE: Earlier model Battery Tenders ® have a WHITE snap cord connector; later models have a BLACK snap cord connector. These snap cords are NOT interchangeable.